Where to put the powder in the Dexp washing machine

An automatic washing machine has long ceased to be a luxury item, but has become a banal necessity, without which it is impossible to imagine a modern comfortable life. At the same time, due to the fact that the powder receptacle is organized differently in different devices, it is often unclear to new users where to put the powder in the Dexp washing machine. We will study this point in detail so that you no longer have such questions.

Powder receiver device of the frontal Dexp machine

Beginners often cannot understand why the “home assistant” has 3 compartments for household chemicals at once, if previously they only used washing powder for washing. However, in the machine, all 3 compartments help to wash things efficiently, because they are intended for different purposes. This can be understood by the numbering, as well as by special symbols that can be found on the inside of the tray. Depending on the model and brand, they can all be located in different places, which is why it is so important to learn the symbols.

Roman numeral I. This icon can most often be found on the far right compartment, which is intended for the prewash mode. You should add household chemicals to it only in situations where you have activated the pre-treatment of things.

Pre-washing is needed in situations where items are extremely soiled and may not be cleaned during the normal cycle.

Roman numeral II. This is the main wash compartment where you add laundry detergent or gel for standard cycles.
Star or flower symbol.Auxiliary department for conditioner, rinse aid and other softening household chemicals. Most often, this tray looks different - it has a different shape, color and volume, so it cannot be confused with other parts of the powder receptacle.

As for loading household chemicals directly into the drum, this is not prohibited, but it is not recommended. This is due to the fact that during operation, the washing machine constantly draws in and drains water, so if the product is immediately added to the drum, then after the first drain of the used liquid, the powder or gel will go down the drain, and the remaining operating cycle will take place without household chemicals. That's why you should add detergent only to the tray from which the washer will pick it up at certain stages of the cycle.

Dexp tray with vertical loading

If you have successfully understood the powder receptacle of a Dexp washing machine with a front-loading type, then learning the structure of the CM tray with a vertical loading will also not be difficult. As in the previous case, a total of 3 compartments were prepared for the user.

The leftmost one is marked with the Roman numeral I - it is intended for the preliminary stage of processing contaminated items.
In the center is the smallest tray, covered with a lid with a star or flower icon - it is needed for conditioner or rinse aid.
Finally, on the right there is a cell of a similar shape to the left cell - it is needed for the main stage of washing.

As you can see, the structure of the powder receptacle in a “home assistant” with a vertical loading type is not much different from a standard front-facing washing machine. The main difference is that here the tray is located on the back of the lid, and not on the front panel, from which it must be pulled out in order to load detergents.

The powder receptacle compartment was mixed up

Manufacturers do not advise constantly loading household chemicals into the wrong cells. Such an error will not affect the condition of household appliances in any way, but will negatively affect the washing process.

This is due to the fact that the smart washing machine itself monitors the cycle, so at one time or another it takes the necessary product from the powder receptacle. If washing powder was added to the conditioner compartment, which is used only during rinsing, then the entire washing phase will take place without detergent. Moreover, household washing chemicals will enter the drum only at the rinsing stage, so they will not have time to be washed out of the laundry. purpose of powder receiver sections

That’s why, due to such an error, after the working cycle you will end up with dirty clothes, also covered with detergent, which the machine simply did not have time to wash during the rinsing stage. Of course, after such a fiasco, no one forbids you to correct the errors and start the wash again, this time adding powder to the compartment with Roman numeral II.

This is necessary because laundry that has not been washed with detergent can cause an allergic reaction, plus it just looks ugly. However, repeated washing will significantly increase water and electricity bills, as well as spend an additional portion of household chemicals. Therefore, you should always add the correct washing powder or gel so as not to waste your time or resources.