Height of socket from floor for dishwasher

Height of socket from floor for dishwasher When purchasing household appliances, you should take care of where they will be placed and the availability of all the necessary communications for their operation even at the stage of choosing a model. This is especially important when buying a dishwasher: its dimensions must correspond to the niche where it will be installed, and this also includes sewerage, water supply, and power supply. The question of the correct placement and height of the socket for a dishwasher is extremely important, since poor-quality or incorrect installation can cause significant problems and inconveniences in using the device in the near future.

How many cm from the floor should the socket be placed?

When choosing the location where the outlet will be placed, several parameters are taken into account.

Height. The optimal parameters are 10–50 cm from the floor surface. If the flooring and baseboards are made of flammable materials, you should place the outlet as far away from them as possible.
Access. It is advisable to isolate the outlet from children. If the distance from the floor is equal to or slightly more than 10 cm, the baby will easily reach the cord and be able to pull out the plug. Therefore, experts advise placing in the upper limits. This will also make it easy to disconnect the device from the power supply in emergency situations, before long trips.
Aesthetics. Sockets can be hidden behind furniture or located in an open area. The connectors look neat, made in the same style and placed on the same level. However, if the style of the room suggests this, you can make them different, which will also give the design some zest.
Cord length.The technique does not involve replacing the factory cord, so if it does not reach the outlet, it must be placed closer.

When installing an outlet, all the features of the room, the style of furniture, the presence of small family members and animals are taken into account, so there are many placement options. It is important that it is not too low, since if it ignites, sparks can easily ignite the baseboard or wooden flooring.

A cord running into a socket from a supposed kitchen cabinet, if we are talking about a built-in dishwasher, will also not look aesthetically pleasing. In this case, it is recommended to hide the electrical connector behind the furniture, but so that it remains accessible.

Don't limit yourself to replacing an old outlet

The location of the outlet should be determined in advance, even before purchasing the device. If the outlet is located far from the niche where the “home assistant” will be installed, you will need to move it closer. If the quality of the old outlet is in doubt or there are traces of exposure to fire or voltage surges, it must be replaced with a new one that meets modern safety standards. purchase a suitable wire

The ideal option would be not only to install a new stationary electrical connector, but also to replace the wire along its entire length, right up to the meter. In this case, you can be sure that the equipment will work smoothly and will not cause a short circuit in the old wiring.

New electrical wiring with a sufficient cross-section will significantly increase the safety of the dishwasher.

The installation of the socket should be entrusted to a professional electrician, who will carry out the installation taking into account all the rules and regulations of the PUE, GOST, SP.Additionally, it is recommended to install a separate circuit breaker for a dedicated line of 10-16 A.