Which hose should I choose for my washing machine?

Which hose to choose for a washing machine The washing machine is connected to the water supply pipes for supplying and discharging liquid using two hoses. They are included in the set of household appliances. But with use, the filler pipe may fail. Because of this, leaks occur, difficulties with water supply, and a new hose has to be connected. To choose an inlet hose for a washing machine, it is better to rely on the advice of professional craftsmen.

What does the fill tube look like?

A hose is a component of a washing machine necessary for connection to the water supply pipe. The quality of this part protects against leaks. If it turns out to be faulty, the owner of the machine risks flooding both his apartment and the one located on the floor below. what does the inlet hose look like

Polyvinyl chloride is used to make filler tubes. To give them strength, reinforced thread and nylon braid are also used in production. The hoses are equipped with plastic fittings and nuts on both sides. Near them there are pressed metal sleeves, providing a tighter and more reliable connection. When connecting hoses to a washing machine, it is better to tighten the plastic nuts by hand. If you do this with metal tools, you can damage the fasteners and cracks will appear on them.

Important! Manufacturers mark the hoses. It gives information about the maximum water pressure at which the product can be used. Typically the label indicates 20 Bar.

Types of inlet hoses

When buying a washing machine, consumers cannot always objectively evaluate the quality of additional components.As a result, problems may arise when connecting equipment or some time after the start of operation. Sometimes the reasons lie in faulty hoses. There are several types of filler tubes.

A simple rubber pipe. Its cost and quality are low.
Reinforced hose. It has a reinforced outer layer made of stainless steel and a nylon braid. Compared to the previous version, the product is more reliable, but does not provide 100% protection against leakage.
Double tube. Rubber is usually used for production. This hose is equipped with the Aquastop system - an additional valve or knob with powder inside the tube. They protect against water leaks. If the integrity of the product is compromised, water does not flow out due to the closing of the valve or swelling of the powder.

Note! The Aquastop system is disposable. It saves you from leakage and helps avoid material damage, but it can only protect you once. Then the hose has to be changed.

After the old washing machine tube fails, it makes sense to opt for high-quality reinforced products or those equipped with the Aquastop system. Fill tubes can have a fixed or adjustable length:

hoses with a constant size up to 5 m;
corrugated products that can be stretched to the desired length to connect the washing machine to the pipes;
tubes in a coil, designed for installing equipment away from pipes, at a distance of up to 10 m.

Most washing machine manufacturing companies produce replacement hoses for their models. They can be purchased separately in stores.Choosing a product from a well-known brand also serves as an additional guarantee against purchasing a low-quality product.

What to look for when purchasing?

You can buy hoses for washing machines at home appliance or plumbing stores. To get a reliable product, you need to familiarize yourself with the characteristics. The most important parameters to pay attention to are listed below.

Hose length. Washing machines can be installed almost anywhere in an apartment or house. The main thing is that the distance to the water supply pipe does not exceed 5 m. This is the maximum length of hoses that manufacturers offer. When connecting, the tubes should not be stretched too much and, on the contrary, should be rolled into a ring. This may shorten their service life. Before purchasing a hose, you need to calculate the optimal length.
The maximum internal pressure that the product can withstand. The meaning is given on the label. But since it is not possible to determine exactly what pressure is maintained in the pipes, it is better to choose a hose with a reserve when purchasing. To connect a washing machine in an apartment, a product marked 20 bar is suitable, in a private house - with a higher internal pressure limit. At the same time, hoses equipped with the Aquastop system also operate at a pressure of 70 bar.
Maximum temperature. Inlet hoses must serve both when cold water comes from the pipes and when it is heated during operation of the washing machine. Water temperature can reach +90⁰C when washing on the “Boiling” program. Many hose manufacturers guarantee that their products will withstand +100⁰C. Only cheap tubes cannot cope with the thermal load. They may melt.

Choosing a high-quality and reliable inlet hose means protecting your home from leaks and protecting yourself from repair costs. When buying a product, you need to pay attention to pressure and temperature indicators and correctly calculate the length. If the hose is selected correctly, there will be no problems with connection and operation.