Water from the sewer is pouring into the washing machine

Water from the sewer is pouring into the washing machine After using a washing machine, we rightly expect that our linen and clothes will be clean and fresh. However, if water from the sewer gets into the washing machine, this desire is unlikely to come true. What to do in this case and how to return the washing to its previous quality?

Is the drain connected correctly?

Incorrect connection of the drain is a very serious malfunction, which most often is the reason that sewer water is poured into the washing machine. The main signs of the siphon effect include: an unpleasant smell of clothes after washing, a malfunctioning drain, poor quality of washing, and a cycle taking longer than expected. Why does this happen and what is meant by incorrect installation of the machine? check that the washing machine is connected correctly

It is necessary that the unit is installed with the body level and the drain hose is connected at a sufficient height. If these rules are violated, the difference in pressure creates a siphon effect, forcing the machine to draw water from the sewer.

Important! The optimal height for the drain hole is 50-100 centimeters from the floor level. In this case, the bend of the inlet hose is located at a height of 50-60 centimeters from the floor, which is higher than the maximum water level in the machine. These settings ensure smooth drainage.

The sink siphon or pipe is clogged

If the drain of the machine is connected to the sink siphon, and the siphon is clogged, this may cause sewage water to flow into the washer drum. Repair in this case is simple: the siphon needs to be disassembled and cleaned.If it is connected to the sewer through a corrugated pipe, it needs to be cleaned.

Drainage from the washing machine through the sink is carried out due to the presence of an outlet with a fitting. If the sewer pipes are not clogged, the water will drain without problems, and the fitting will protect the cavity of the washing machine from unpleasant odors and splashes of waste water. Sink siphon clogged

To ensure good protection, it is recommended to point the L-shaped fitting up, not down, and periodically change the rubber gaskets on it, which tend to wear out. However, if there is a blockage in the pipes, these measures against the siphon effect are useless.

Let's clean the inside of the machine

In order to enjoy the quality of washing after repairing a breakdown or malfunction, you need to prepare the washing machine for further use by cleaning it from traces of sewage water. Tiret washing machine cleaner is good for this.

Note! Do not confuse it with Tiret Turbo clearing gel.

The product is used as follows:

measure the amount of product according to the instructions and pour it into the washer tray, into the main wash compartment;
run any long-term washing program idle, setting the water temperature to 60 degrees;
After the end of the cycle, start the rinse mode separately.

Now you can safely wash things without worrying about their quality. If the sewer drain is connected correctly, at the first manifestations of the siphon effect, immediately clean the siphon or sewer pipes, remembering to change the rubber gaskets on the drain fitting from time to time (if the drainage is carried out through the sink). Making these simple DIY repairs is not difficult and doesn’t cost any money!