How to return the shape of a cap after washing?

How to return the shape of a cap after washing Anyone can throw a baseball cap into a washing machine; the main problem is how to return the shape to the cap after washing. Having pulled out the headdress from the drum, having completed the “water procedures”, one can note with bitterness that it is wrinkled and skewed. Let's figure out how to straighten the product and whether it is possible to completely prevent its deformation.

We return the cap to its former appearance

Before attempting to restore the cap to its original appearance, you should study the information provided on the product label. The tag is usually sewn on the inside. If washing rules are not followed, the baseball cap may become so damaged that it will be impossible to restore it. For example, if there is a cardboard insert in the visor, it will definitely become unusable after the machine.

If wet cleaning is acceptable, but the product is slightly warped after washing, you can restore its shape in this way:

wet your cap;
put a hat on an object of a suitable size, for example a jar;
carefully straighten the fabric on all elements of the baseball cap;
leave the product to dry in this position.

If there is no three-liter jar in the apartment, you can use the following as a frame for drying a baseball cap: pull the cap over the can

inflated balloon;
a salad bowl of a suitable type, placed upside down;
special forms for drying hats.

The desired shape of the cap will be given by the frame on which the wet product is stretched.

Therefore, pay special attention to “flattening” the baseball cap on a suitable object. After drying, the cap will take the desired shape.

Trying to iron it

You can try to smooth out a crumpled baseball cap with an iron.To straighten the fabric, in addition to the ironing board, use a special armrest or roller twisted from a towel.

When using an iron, it is important to avoid:

formation of creases;
deformation of the crown;
ironing the visor at high temperatures.

If the cap is ironed from the front side, be sure to do it through a layer of fabric or gauze. Otherwise, you can damage the fabric and leave marks on the material from the soleplate of the iron.

Jet of steam

Steamers are very popular today. Using steam, ironing a baseball cap is much easier than using an iron. The cap should be pulled onto a frame of a suitable size and then treated with a powerful jet of steam. This way the headdress will straighten and take on the desired shape.

The temperature regime of the device is selected taking into account the material from which the baseball cap is made. If it is synthetic, it is better to set the minimum degree. For cotton, the temperature must be higher. iron the cap with a steamer

A low-power steamer will not help in this case. To restore the cap to its original appearance, you should use a stationary device that provides steam at a speed of 40-50 g/min.

Before steaming your cap, you should make sure that such a procedure is not contraindicated for the product.

Wash your cap correctly

Not every hat is allowed to be loaded into the machine. Baseball caps with a thick top and a hard visor cannot be machine washed; only hand cleaning is allowed.

The maximum effect is achieved by cleaning the cap with a toothbrush. This way you can get into hard-to-reach places and remove dirt. You can use your usual detergents or liquid soap.

To prevent the product from deforming, it is allowed to starch it. Then you won't have to iron your baseball cap.The algorithm for preparing a solution for treatment is as follows:

take the basin;
pour 100 grams of potato starch into a container;
pour 100 ml of cold and 900 ml of hot water;
mix the ingredients;
wait until the solution cools down.

Afterwards, you need to dip the crown of the cap into the starch solution, holding the visor (it does not require additional starch, because it is already hard).

For further drying, pull the baseball cap onto a frame of a suitable shape and straighten the fabric thoroughly. All you have to do is wait for the product to dry completely.

Useful tips

To begin with, it should be noted that studying the label of a thing is the first and main stage of proper care. The label says whether the baseball cap can be machine washed, in what program and at what temperature. It also shows how best to iron your cap.

As for ironing, you need to move the iron either along the back surface of the cap, or through an additional layer of fabric or gauze.

If the product has stripes and decorative elements, it is important not to catch them with the hot sole.

If the baseball cap is not very dirty, it is better to stick to dry cleaning. Then it will definitely be possible to prevent deformation of the material.