Do-it-yourself Atlant washing machine installation

When a person buys a new washing machine, a dilemma arises: whether to connect it yourself or seek help from a specialist. Sometimes home appliance manufacturers prohibit self-installation. If this condition is violated, the warranty obligations are canceled. If you decide to install the Atlant washing machine yourself, check this important detail in the store. When there are no restrictions, you can start connecting without fear of losing the right to repair under warranty.

Preliminary check of the unit

Regardless of whether you buy the washing machine yourself or order delivery to your home, before you sign the receipt papers, check its functionality. In the presence of the seller's representative, open the package and inspect the body of the washing machine. There should not be even minimal damage on it.

Most often they occur during delivery, when it is carelessly transported or lifted into the apartment. If, when inspecting the washing machine, you see chipped paint on it or a mark from an impact, do not sign the report. Demand that the product be replaced with one that is fully functional and without damage.

If the washing machine is delivered safe and sound, calmly sign the acceptance documents. But before you release the courier, make sure you have the store number where you can contact him. The phone will come in handy if a defect is subsequently discovered or other issues need to be resolved quickly.

The next step in checking the washing machine is connecting it to electricity.Plug in the power cord and make sure that the backlight of the screen and control unit is on. Turn the washing machine mode switching knob, the values ​​​​on the display should change.

Getting ready for the procedure

Then you can start connecting the equipment. To do this, you need to remove the fixing bolts located on the rear wall of the washing machine body. They are designed to hold the tank so that it is securely fastened during transport. Remember that until you remove them, the washing drum will not move. Moreover, starting a washing machine with retaining bolts remaining will lead to breakdown and non-warranty repair.

Attention! Before installing the washing machine yourself, you must read the attached instructions.

The fasteners are removed using a wrench or pliers. After removing them, close the holes with plastic plugs. You will find them in the parts kit that came with your washing machine. To do everything correctly, refer to the manufacturer's instructions.

Place for a “home assistant”

Before connecting the machine to the sewer and electricity, think about where exactly you will put it. It is best to choose a location in advance and purchase a washing machine according to the dimensions of your bathroom or kitchen (depending on where it will be located). If you buy a built-in washing machine, be sure to think about how to close it. The door must be the right length and width, fit in with its surroundings and be easy to install.

Pay attention to the floor covering on which the washing machine will stand. The best choice would be a concrete floor or tiles, they are the most durable.If there are boards under the washer, they must first be strengthened.

Important! It is better not to place equipment on laminate flooring, because if it leaks, it will swell and become unusable.

When choosing an installation location, pay special attention to the length of the hoses; they should be enough to reach the points of connection to the pipes. When you have prepared the place and made sure that the washing machine fits in it, you can start connecting. This must be done strictly according to the instructions.

Is the outlet compliant?

To ensure electrical safety, the washing machine requires a dedicated outlet with the appropriate voltage. It must be grounded and protected from liquid ingress. Although modern household appliances, as a rule, meet all standards for protecting people from electric shock, it is better to be on the safe side.

The standard length of an electrical cord is usually one and a half meters. In this regard, you should consider the location of the outlet in the immediate vicinity of the washing machine. Of course, you can use an extension cord, but this is much more dangerous.

Why is grounding necessary in a socket? It prevents minor electric shocks that occur due to voltage entering the external parts of the machine. They do not pose any serious danger to the user, other than inconvenience. For this reason, it is recommended to use grounded outlets.

We provide equipment with water

Next, you need to connect the machine to the sewerage and water supply. Typically, the washing machine's water intake hose is connected to a cold pipe. There are models that are allowed to be connected to hot water, but this is rare and certainly does not benefit the equipment.The washing machine has a heating element that brings the water to the temperature required for this mode.

Moreover, connecting to a hot pipe can cause harm:

• water comes in more contaminated, which leads to constant filter blockages;
• Higher hardness worsens the quality of washing; you will have to spend much more washing powder to achieve results.

Read the instructions, and if the manufacturer does not provide an option for connecting to a hot water supply, connect the hose to the cold pipe. You shouldn't even consider other options. They will only harm your new washing machine.

If there used to be an old washing machine in this place, installing it yourself will take place without any problems. You just need to screw the new hoses to the same outlet points. After this, you need to open the water and check for leaks at the connection point.

It will be more difficult to connect the washing machine in a new location. If you don’t already have a pipe tap, you’ll have to do it yourself or call a specialist. It all depends on the experience and set of tools you have.

Important! The tap that supplies water to the washing machine must be in the closed position outside of the washing process to avoid leakage.

When connecting on your own, remember the following important points. Be sure to use only the hoses that come with the washing machine. Pay attention to the pressure in the pipe; it must be within the values ​​recommended in the instructions.

Sewage outlet

In addition to connecting to electricity and water supply, you should also worry about the removal of dirty water. Some people simply lower the hose into the bathtub or sink, but this is completely unaesthetic and unhygienic.Surfaces quickly become dirty and coated with plaque; they will have to be cleaned much more often.

The correct solution would be to connect a siphon to the fitting, a special outlet that is found in almost all modern plumbing fixtures. It is closed with a plug that must be removed and a drain hose put in its place. The connection is securely secured with a clamp.

When connecting, please note that the drain hose has a special bend. It prevents unpleasant odors from the sewer from entering the washing machine. Otherwise, even the most fragrant fabric softeners will not help.

So, you have connected the washing machine to electricity, water supply and sewerage. Now we need to adjust it and try the new technique in action. When starting up for the first time, you should constantly be nearby in order to notice problems in the operation of the washing machine in time. In practice, installing the Atlant washing machine is quite simple and usually does not cause problems. The main thing is to do everything according to the instructions and follow the above recommendations.

Reader comments

• Share your opinion - leave a comment