Water hardness level in Moscow for a dishwasher

water hardness for PMM In order to successfully operate your dishwasher for a long time, you must carefully study the instructions and follow them strictly. First of all, you need to think about the quality of the water that goes into the dishwasher. Today we would like to talk about the level of water hardness in Moscow. Is the water supplied to your home suitable for dishwashers? After all, if the water is very hard, then even an ion exchanger will not be able to soften it and problems will arise. In general, we'll figure it out.

Indicators in different administrative districts

It would probably be more correct to give indicators of water hardness by Moscow region, but in this case the article would turn out to be too cumbersome. And there is no particular point in this, since the difference between several adjacent areas will be small. Let us present the water hardness indicators for the administrative districts of Moscow.

Central – ⁰The average figure is 3.3.
Northern – ⁰F on average 3.6.
North-Eastern – ⁰F on average 3.4.
Eastern – ⁰F on average 3.
South-East – ⁰F about 3.2.
Southern – ⁰F about 3.5.
Southwestern – ⁰F on average 3.4.
Western – ⁰F about 3.5.
Northwestern – ⁰F about 3.1.
Zelenogradsky – ⁰F about 3.5.
Troitsky – ⁰F about 3.2.
Novomoskovsky – ⁰F about 3.1.

Troitsky and Novomoskovsky administrative districts are very large, so the range of water hardness there is from 3.1 to 3.4 ⁰AND.

If you want to get more accurate information about the current water hardness value at your address, you can visit the Mosvodokanal website. On the website, in the “Population” section, there is a subsection “Water quality in Moscow regions.” Go to this subsection and enter your home address above the map. Below in the table, among other things, the current water hardness indicator will appear.

Changes in indicators

It is not for nothing that Mosvodokanal has organized for the population of Moscow the opportunity to monitor the condition of the water entering their homes online. Key indicators are constantly changing, so it is not enough to look at them once, they need to be tracked. Why do hardness values change? There are quite a few reasons, but the main changes occur when the seasons change.

In winter, water is the hardest. It is in winter, in areas that are unfavorable in terms of water quality, that dishwashers and washing machines are at greatest risk. In spring, the water in the water supply becomes much softer due to the entry of large amounts of melt and rainwater into the reservoirs. In summer, the indicators can also change, but only slightly, but in the fall, during the rainy season, the water softens for a while and remains softer than normal until the first frost.

The hardness of water for a dishwasher is quite easy to track if you live within the Moscow Ring Road. The Mosvodokanal website will help. This service is not available to people who live far from Moscow, so find out the water hardness for the dishwasher they will have to do it on their own.

What indicators are considered normal?

hardness of water We just have to find out how hard water a dishwasher can withstand. In other words, what are the acceptable values? ⁰F for household dishwashers. To find out these values, just open the instructions for your dishwasher, but the problem is that the manufacturer may indicate the values not in degrees of hardness ⁰F, and in other units of measurement:

⁰D.H.;
⁰Clark;
⁰F;
ppm

Converting water hardness indicators from one unit to another is quite tedious, and it’s not a fact that you will do it correctly. The Mosvodokanal website will come to the rescue again. We go to the “Population” section, and then to the “Water Hardness Calculator” subsection. For example, according to the instructions, the normal hardness index for PMM is 9⁰D.H. Enter 9 in the left line of the calculator. In the “Current unit of measurement” column, select ⁰D.H. In the “Required unit of measurement” column, select ⁰G. The result will appear in the line “Result of indicator calculation”. In our case 9⁰DH = 3.2 ⁰AND.

All that remains is to call the water supply organization in your city and find out the current level of water hardness. Such information is publicly available, no one will hide it from you. A simple comparison of the obtained indicators will tell you how close to ideal the water entering your dishwasher is.

So, in general, in terms of hardness level, water in Moscow is suitable for a dishwasher. However, in winter the situation may change, so do not forget to occasionally visit the Mosvodokanal website to check. Good luck!