Drain hose extension for washing machine - instructions

Washing machine drain hose extension Properly organized drainage of the washing machine will ensure its uninterrupted and high-quality operation. To do this, you will need to pay attention to some features. In the process of ensuring proper drainage, you should first inspect the washing machine hose designed for draining water and measure it. If it is not long enough, you will need to purchase a drain hose extension for the washing machine.

In addition, it is worth taking into account the diameter of the sewer pipe, which should be at least 4 cm. It is also important not to forget about the diagram according to which the unit’s motor is connected.

Features of organizing water drainage from a washing machine

Before you begin to disassemble the issue of connecting the washing machine drain, you need to know that water is pumped out of the machine using a pump, and a short drain hose reduces the load during its operation.

It is also very important to correctly position the washing machine drain hose in the drainage area. The lower edge of the hose directed into the sewer pipe must be located at a distance of at least 60 cm from the sewer and no more than 1 meter. Of course, if the hose is connected to a siphon, then the height does not matter.

When organizing the drainage of water, a rather important point should be taken into account: the edge of the hose should not reach the water, as this creates an obstruction to the flow of water. If you do not take into account the considered features, then a problem with the operation of the washing machine may occur. For example, the display may display an error and the operation cycle may be interrupted.

Drain connection methods

You can connect the washing machine drain using one of several options:

Using a special clamp - fixing the hose on the side of the bathroom or on the edge of the sink;
Install the drainage hose and connect it to the siphon;
Lay an additional drainage pipe elbow.

Any of the above methods is quite simple and does not require special knowledge and skills in handling plumbing. You can easily organize any method of drainage yourself.

However, it should be taken into account that the height of the washing machine drain at the highest point should not be higher than 1 m. Only in this case will the pump be able to fully cope with pumping out water.

How to extend the hose

Hose extensions Sometimes, after purchasing a washing machine, we discover that the hose for draining the water is not long enough. It doesn't reach where it needs to be. Or you decided to put the machine in a new place and are faced with a situation where the existing hose is not enough.

What to do? Should I go to the nearest store that sells consumer electronics, to the department that sells washing machines, to get a hose of the required length? However, hoses are not of a standard size, are longer than usual, cost an order of magnitude more, and such a purchase can really cost a pretty penny. Try to solve this problem on your own. For this purpose, you need to select a drain hose extension for the washing machine, a suitable connector, and also prepare clamps.

First you need to determine what specific length of hose you need to add. To do this, you can use centimeters or a tape measure and measure the missing distance.After that, you need to purchase a plastic connector, a pair of clamps and one drain hose of standard length. Store shelves are full of a variety of types of connectors. It is better to choose one whose edges are not smooth, but like a herringbone. This allows you to increase the strength and reliability of the connection.

After purchasing the required materials, you can start extending the drain hose. First of all, you need to take a connector and use it to connect the drain hose of your washing machine with the one you just purchased.

The joints between the hoses and the connector should be tightened with clamps. The store can assure you that one clamp will be enough, but it’s better to be on the safe side than to defend yourself from flooded neighbors.

When purchasing an extension for the drain hose of a washing machine complete with a connector, you will still have to purchase clamps separately, since they are not included in the kit.

This design will serve you for many years to come. With a careful approach to the selection of all components and careful connection, you will never encounter a leak at the hose connection points.

Summing up

As you can see, organizing the correct drain for a washing machine is not so difficult and you can easily do everything yourself. If you approach this issue with all responsibility, spare no time and take into account all the required nuances, then your little assistant will reliably serve you for many years.

If you miss some features and do not organize the correct drainage of water, then the pump responsible for pumping water out of the washing machine may become unusable.And this will add worries not only in the form of inconvenience in the form of problems with washing, but also additional time and money spent on repairing the machine. Despite the fact that the cost of a new pump is quite significant, plus payment for the work of a specialist. It’s better to do everything conscientiously once and avoid problems in the future.