The dryer won't fit through the door

Whenever you purchase a new appliance, there is always a time when it needs to be carried through the door to be installed in the right place. However, sometimes it happens that the dimensions of the device do not correspond to the width of the opening, which is why this process is not possible. But don’t worry: we will help you cope with the situation when your dryer does not fit through the doorway and tell you what to do in this case.

Will removing the casing, pipe and door help?

A close inspection of your dryer will reveal three main protruding features. They are the ones who prevent the technology from passing through. These include:

• casing;
• pipe branch;
• hatch door.

What makes passage most difficult is the casing. If you remove it, you can significantly reduce the dimensions of the dryer, which will simplify the process of moving it through a narrow opening. However, before you remove the part, you need to make sure that you know how to do it correctly and know how to install the casing back without causing damage to it. Removing the spigot also helps reduce the size of the dryer, but it will need to be reconnected so that there are no leaks. Removing the door, especially if it is massive, also makes it easier to move the dryer through the opening, and also avoids damage to the element itself and the wall.

However, there are also situations when the opening turns out to be so narrow that dismantling the listed elements does not solve the problem. Under the casing you can find a fan, which also interferes with the passage, but it is difficult to remove it, since the part is pressed in.Some advise removing the fan by heating it with a hairdryer, but it is unknown whether it will be possible to return everything back to its place, given that we are talking about a completely new technique.

In such situations, it is necessary to take radical measures: you can either dismantle the doorway and then restore it, or disassemble the dryer and carry it into the room in parts!

It's worth noting that removing a doorway is a rare solution that involves significant expense and permanent changes to your home. However, sometimes this option is the only way out. In order to do this, you will need to contact specialists, and they will help you dismantle the door frame.

We bring in the dryer disassembled

The dryer is one of the heaviest and bulkiest household appliances, and disassembling it seems to be quite a difficult task. However, with the right approach and instructions, you can do it without unnecessary problems. Before you get started, make sure you have all the necessary tools. Also be prepared for the fact that this process will take a decent amount of time and at times will require special efforts from you.

First, you should pay attention to the cover of the device. For many dryer models, the back of the lid extends beyond the body dimensions by several centimeters, so it is quite possible that it is this protrusion that prevents the device from being carried through the opening. In this case, you will need to remove it. This is done quite easily, since the cover is attached only with a couple of screws at the back of the device. Arm yourself with a Phillips screwdriver and proceed from the following procedure:

• unscrew the screws;
• slide the cover towards you, towards the rear of the machine;
• pull it up and it comes off easily.

What to do if there is no protrusion, and removing the cover didn’t really help? In this case, you can try to dismantle the loading hatch. This is a fairly simple procedure that, if performed carefully, will not harm household appliances.

When you open the hatch, you will see a bracket that holds it and acts as a door hinge. You will once again need a screwdriver to unscrew the screws that secure it to the machine body. However, remember: if you remove the hatch and leave the element on the body, it will interfere with your installation of the device indoors.

However, there are times when even these actions are not enough. For example, the control panel may have knobs that protrude and are not recessed into the cabinet. It is important to remember that it is not recommended to dismantle the panel yourself. In order for dismantling to be successful, you need to know the attachment points. In addition, it may be secured with latches, and if they are broken, the panel cannot be put back into place.

In such cases, you can dismantle the fill valve. Its nozzle, intended for attaching the water supply hose, extends from the housing by several centimeters, and can be accessed by removing the top cover. Typically the valve is secured to the back wall with two screws. After removing them, it can be moved inside the case without affecting the wires. If necessary, you can pull the drain hose in through the hole in the housing.

After opening the door, also inspect the inside of the dryer and pay attention to the drum - it will also need to be removed.Rotate the fasteners that hold it inside the machine and carefully remove the part from the housing.

Be careful as the drum may be quite heavy.

In order to move parts of the dryer, you can use special belts that will help evenly distribute the weight of all components. Don't forget to also use a protective material to avoid scratches and damage to the floors and walls. The assembly of the unit will be carried out on site in the reverse order. Make sure that all elements are carefully screwed and connected, and only then turn on the “home assistant”, checking its functionality.

Now you know that if your dryer won't fit through the doorway, you'll need to take a closer look at the situation and make an informed decision. Remember that safety is the most important aspect of this matter. Therefore, if it seems that such a task exceeds your competence, it is better to seek help from professionals.

Reader comments

• Share your opinion - leave a comment