Service life of the Indesit washing machine

Service life of the Indesit washing machine The warranty period and service life of an Indesit washing machine are two different concepts. In the first case, this refers to the time during which the manufacturer undertakes, at its own expense, to eliminate breakdowns that occurred through no fault of the user. And the estimated service life means how long the washing machine will work with proper care and compliance with all loading standards.

Let's figure out how many years of operation Indesit automatic machines are designed for. It is clear that the terms will be averaged, but you can still get a general idea of the reliability of washing machines from the Italian brand.

How many years will an Indesit machine last?

When choosing a new washing machine, buyers always look at who the manufacturer of the equipment is. Everyone wants to purchase the most reliable SMA that will work without problems during the stated service life. Many people choose Indesit machines - this brand has long proven itself to be the best.

The declared service life of Indesit washing machines is 6 years.

Data regarding the estimated operating period are averaged. Most machines last much longer than advertised. The warranty period for Indesit SMA is 1 year. That is, users will have the right to free repairs and maintenance in the first 12 months after purchase. Warranty for Indesit washing machine

How long the machine will work is influenced by many factors:

user compliance with loading standards;
tap water hardness level;
the quality of the laundry detergents used;
timely maintenance of equipment;
absence of manufacturing defects.

The features of using an automatic machine are of great importance. If you regularly violate the basic rules of operation of the Indesit SMA, allow the machine to be overloaded, or foreign objects get into the tank, then the washing machine will fail faster. Therefore, it is so important not to neglect the manufacturer’s recommendations described in the instructions.

According to GOST 8051-83, the average service life of automatic machines must be at least 15 years, or 700 hours of operation. Today, SMAs that meet this standard are rare. Typically, manufacturers indicate a shorter period - from 5 to 10 years.

Keep an eye on your washing machine

Timely and competent care of the equipment will extend the life of the Indesit SMA. It is imperative to “ventilate” the machine after each use. It is also necessary to wipe the glass of the hatch door and the drum cuff dry. This will prevent the formation of mold and mildew inside the washer.

Once every 2-3 months, deeper maintenance of the automatic machine is necessary. During superficial prevention of SMA, you should:

turn off the power to the machine;
disconnect the device from the water supply and sewerage;
remove and clean the powder receptacle;
rinse the inlet hose of the machine, clean the filter mesh located in front of the corrugation;
Unscrew the garbage filter, clean it, and also wipe the walls of the hole with a damp cloth. Shine a flashlight into the depths and remove the wound threads and hair from the impeller of the drain pump;
assess the condition of the drum cuff, whether there is mold, cracks or other defects on it;
spin the drum, check that it rotates without problems, without making any extraneous noise;
rinse the drain hose of the machine under running water.

All of the above steps can be easily performed independently, at home. Prevention of SMA will take no more than 15-20 minutes.It is recommended to rinse the detergent cuvette more often - once every 2-3 weeks, and other manipulations can be performed every 3 months.

Don't neglect prevention

If you have been using an automatic machine for more than a year, be sure to monitor all changes in its operation. If you notice that the washer begins to hum or vibrate strongly, perform an in-depth check of the SMA. It is necessary to disassemble the device and assess the condition:

shock absorbers;
counterweights;
drive belt;
bearing unit.

To conduct an in-depth check you will need:

turn off the power to the washing machine;
disconnect the machine from the water supply and sewerage;
move the device away from the wall to have access to all sides of the case;
prepare a Phillips screwdriver and an adjustable wrench;
remove the CMA housing cover by unscrewing the bolts holding it. If you have a top-loading machine, remove the side wall;
remove the rear panel of the machine by removing the fixing screws (does not apply to top-loading SMA);
find the counterweights, check if their fastenings are loose. If you notice any looseness, tighten the bolts;
check the tension of the drive belt. If the rubber periodically falls off, it is better to replace it with a new one;
find the shock absorbers (they are located at the bottom). The springs must be elastic; if necessary, treat them with graphite lubricant;
clean the heating element. To do this, you need to disconnect the wiring from the heating element, unscrew the central nut and remove the heater from the housing. Scale can be removed from the part with a hard sponge or toothbrush;
check if there is a blockage in the drain pipe;
inspect the wires and sensors inside the housing. If you find obvious defects, replace the components.

Before disconnecting the contacts from the sensors or heating elements, take a photo of the wire connection diagram so as not to make mistakes during subsequent assembly.

To check the condition of the bearing assembly, you will have to remove and disassemble the SMA tank. This is a rather labor-intensive process, so the serviceability of parts is judged by external signs. For example, if there is play in the drum, a strong grinding and rattling noise during operation, and there are rusty stains on the back of the tank, most likely the bearings will have to be replaced.