How to reassemble a washing machine seat after washing?

Children's washing machine seats get dirty faster than adults and require periodic cleaning. For washing, the device is disassembled, the cover is removed, after which the structure must be assembled. The latter is not easy to deal with: you must follow the instructions strictly, otherwise the safety of the young passenger will be at risk. We invite you to find out how to assemble a washing machine seat after washing and what difficulties you will encounter. Step-by-step algorithms and tips will help with assembly.

Collecting step by step

Assembling a child washing machine seat is not an easy task. Before you get started, you need to study the instructions, which are necessarily included with each seat. It provides step-by-step instructions for your specific model.

If the manual is lost, then we focus on the standard instructions:

• thread the straps through the holes on the bottom of the seat (on the cover and on the sides of the chair);
• spread the cover over the surface of the washing machine seat so that there are no creases, folds or lumps;
• fasten the cover to the frame using the available fasteners (fasteners vary depending on the model and can be in the form of buttons, buttons, clips and Velcro);
• insert pads into the upper belts;
• pull the cape over the back and secure;
• pass all straps through the provided metal buckle.

When assembling the child washing machine seat, you must strictly follow the included instructions!

On some models, the child washing machine seat is equipped with a detachable headboard. It is placed under the cover and secured in the right place. If you can’t complete the assembly using the standard instructions, then you should look for the original manual in electronic format on the manufacturer’s official website.

Why doesn't it work?

Not everything always goes according to plan: often it is not possible to assemble a chair. The main reason for this outcome is a violation of the order of actions. There is a high probability that confusion occurred at the disassembly stage. Most likely, the person did not follow the given sequence.

You can avoid mistakes if you record all your actions on video or photos. Then it’s easier to stick to the scheme and not forget about the Nth elements.

To avoid confusion, you must strictly adhere to the instructions. Ideally, focus on “your” leadership; in extreme cases, on “someone else’s.” There is no significant difference between the algorithms; the main thing is to be able to adapt to the existing differences, using logic and intelligence.

If you can’t assemble the chair, you should ask for help. First of all, we go to more experienced friends who have already dealt with child seats. They can also provide advice at the store where the device was purchased. There is also an option with the support service on the official website - we find the manufacturer and fill out the application form.

Watch your belts

Particular attention must be paid to belts. It is difficult to confuse them: the long ones are fixed on the back, the short ones go from the bottom. But it is better to check the fastenings again after installation.

If the belts are tightened too tightly, the child will feel uncomfortable in the seat. To correct the situation, it is necessary to loosen the blades using specially provided regulators.We remember that the straps should not only squeeze, but also dangle - the optimal distance between them and the baby is 2-3 cm. If the holders are too long, you can shorten them to a comfortable size.

Before using a child washing machine seat, the position and length of the seat belts must be adjusted.

The correct placement of the belts also plays a role. At the top, the straps should “come out” of the back at the level of the child’s shoulders. If the holes are located too low, under the shoulder blades, then you should think about buying a new chair. On some height-type models, the position of the holders can be adjusted.

Sometimes belts cause inconvenience due to knocked down or bent “pads”. In this case, you should remove the pads, straighten them, steam them and return them to their place.

Check the lining

The washed cover must be spread over the seat, otherwise the child will complain of discomfort. Even one fold or bump will disturb the baby, so you need to feel the entire chair and smooth out all areas with tangled fabric. At the same time, we also check the fixation: probably the rivet or Velcro has come loose and the cape has been pulled off the frame.

Small things like a toy or a coin that have fallen under the cover also prevent the little passenger from sitting comfortably in the seat. It is better to remove the cape, shake it out, and then re-tighten it.

Inspect fasteners and covers

Difficulties in tightening covers also arise when the cover becomes deformed after cleaning. Failure to follow the rules for caring for the product leads to loss of shape. As a rule, the reason for changes in size is heating the water above 40 degrees, turning on a machine spin, or drying on a heater. In any case, it is necessary to correct the situation by re-washing.

It is not necessary to run the cape through the machine, nor is it necessary to add detergents. It is enough to fill the basin with water, wet the cover and let the water drain freely. Afterwards, without squeezing, the product is placed on a flat, dry surface and left until completely dry. We pay special attention to the correct installation of the chair itself. It must be secured according to the instructions to ensure the safety of the young passenger. If a fastening has moved somewhere or stability has been lost, the structure needs repair.

The machine belt must run strictly along the guides. Each model has its own fasteners, but more often the strap passes over the child’s shoulder to his hip, without moving towards the neck. At the “finish”, the holder clings to the latch and is buckled into the groove. Slight rocking of the chair in both directions is allowed. The maximum deviation is 2 cm. If the seat moves more, then tighten the standard belts.

Expert advice

The child seat must be handled with extreme care so as not to destroy the well-thought-out design. But this does not mean that you need to put off the next wash for fear of damaging the device. Everything will go smoothly and simply if you follow a few recommendations:

Only completely dried covers are placed over the chair - otherwise mold will form under the cover.

• in case of local contamination, you can clean the cover without removing it from the chair;
• the lining under the cape does not like water - it is better to clean it dry;
• You cannot put a “foreign” cover over the seat - only the original cover, which was sewn taking into account the design of the chair;
• It is more convenient to put the cover on the lower part of the chair if you place it horizontally;
• Do not put on under-dried covers - dampness will cause mold and an unpleasant odor to appear.

There is no need to be afraid of washing covers. Everything will be easy if you act consistently and according to the instructions.

Reader comments

• Share your opinion - leave a comment