How to remove the powder tray in a Samsung washing machine?

How to remove the powder tray in a Samsung washing machineIn order for your washing machine to enjoy uninterrupted operation and high quality washing for a long time, it is necessary to take care of it in a timely manner. It is important to regularly clean the powder receptacle; this will help avoid the formation of plaque, mold and mildew inside the cuvette. For proper rinsing, you will need to remove the container from the housing. We'll tell you how to remove the powder tray in a Samsung washing machine, how to clean the container, and how to prevent the formation of plaque.

How to extract it correctly?

Pulling out the powder container is quite simple, but you need to take a couple of nuances into account. So, if you simply pull the tray towards you, the protection system will be activated and the cuvette will get stuck in the housing. Also, if you strongly pull the powder receptacle, you can damage the structure of the washing machine. You must act carefully.

  1. Pull the powder container towards you until the tray stops.
  2. Without loosening your grip, stop pulling on the dispenser.
  3. With your free hand, press the tab on the top of the middle section of the tray.
  4. Pull the container out of the niche.

By pressing the tab located above the middle cell of the powder receptacle, you can safely remove the container from the AGR body.

Putting the tray in the washing machine is even easier. There are special guides on the walls of the hole for the powder receiver. All that remains is to ensure that the cuvette fits completely into the body and fits tightly into place.press the tongue

We wash the box

How often should you care for your “home assistant”? It is ideal to rinse the detergent drawer after each use of the washing machine. So, when all the things are washed, all that remains is to take out the powder container and rinse it with warm water. The granules remaining on the walls can be easily washed off with water pressure.

If the cuvette has not been cleaned for a long time, you will have to make more efforts. You will need a sponge with a hard surface and soda. In a container you need to dilute water and soda in a 1:1 ratio. The resulting composition is poured into the tray. The container should be left for several hours to allow the baking soda to kill the mold. Then you need to wipe the walls of the dispenser with the hard side of the sponge and rinse with warm water.

If there is a lot of dirt, try filling the powder receptacle with soda and pouring 9% vinegar on top. A chemical reaction will occur, after which the walls of the container will shine clean.

A mixture of nine percent vinegar and boiling water will help to cope with stains. It is necessary to remove the powder receptacle, fill it with a liter of boiled water and add 200 ml of acetic acid. The tray should be left in this state for 6-10 hours. Afterwards, the cuvette walls are wiped with a sponge or washcloth.

Citric acid will also remove plaque from the dispenser sections. You can pour the food additive into the tray and start the wash cycle. This will clean not only the cuvette, but also the insides of the MCA.wash the tray

It is best to prevent plaque from appearing on the walls of the container and take measures to prevent the formation of mold. This is achieved by rinsing the tray at the end of the wash. It is very important to ensure that the moisture from the powder receptacle evaporates, so after washing, either wipe the walls dry with a rag, or leave it open for ventilation.

To reduce dirt

In addition to timely care, there are a few more tips for maintaining your Samsung automatic machine in perfect condition.To keep the powder tray less dirty, you should:

  • install a filter to purify the water entering the washing machine;
  • use only high-quality and safe laundry detergents;
  • leave the machine hatch open for ventilation after each use of the machine.

By following these simple rules, it is not difficult to keep your “home assistant” clean. When caring for SMA, you will enjoy high quality washing and uninterrupted operation of the equipment for a long time.

   

Reader comments

  • Share your opinion - leave a comment

Add a comment

We recommend reading

Washing machine error codes