Sometimes it becomes necessary to disassemble the Beko washing machine yourself, especially if a minor breakdown occurs. To carry out repairs, you need to get to the required part, and before that, partially disassemble the case. How to remove the top cover of a Beko washing machine? There will be no difficulties, just follow the instructions below.
How to quickly dismantle a part?
Removing the top cover of your Beko washing machine is easy. But first you need to prepare the equipment for disassembly. Disconnect the washing machine from the electrical network, turn off the water supply, and remove the existing hoses. Move the machine away from the wall to make it easier to disassemble.
Now you can proceed directly to dismantling the upper part of the washing machine:
go around the washing machine;
find and unscrew the two screws holding the top cover (they are located under its protrusion near the right and left corners of the machine body);
grab the lid and pull it towards you just a few centimeters;
lift the upper part of the housing and move it to the side;
This completes the process of disassembling the Beko washing machine.
Attention! If the cover does not move, do not pry it with sharp objects under any circumstances, as this will only damage the equipment.
If you can't budge the part, it's most likely jammed. In this case, it is better to try to stir it up by moving it back and forth. You can gently tap with a mallet and try again to pull the lid out. Do not use excessive force, be patient and try to move the part. The cover is removed in a similar way on many modern models of this brand.
What's the use of this?
We figured out exactly how to remove the top cover of the Beko washing machine. But in what situations may it be necessary to dismantle it? What parts of the machine can be replaced or repaired if this part of the body is removed?
By removing the top of the washing machine, you will have access to the fill valve. It must be checked if there are problems with the flow of water during operation of the machine, there is too much or too little of it. This part is located in the upper right corner of the case near the back cover. You can check the valve coil and other elements of the mechanism. If necessary, by removing only the top part of the washing machine, you can completely replace the fill valve with a new one.
If the washing powder is poorly removed after washing, you need to check the condition of the powder receptacle. To do this, remove the cover as described above, then remove the pipe or clean it. When required, you can completely replace the failed part.
At the top of the body there is another important element of the washing machine - the pressure switch. It is required for normal water drainage. If the washer refuses to drain the liquid or does it at the wrong time, showing an error on the screen, the problem lies in this particular part. To replace it, you need to unscrew the mount and disconnect the pressure switch from the wires, then install a new spare part.
When you remove the cover of the washing machine, you will have access to the upper counterweight. Of course, it breaks infrequently, but it can still cause an operational problem. If you need to repair this part, there is no way to do without removing the housing cover.
Removing the top will also help you get to the electrical part of the Beko washing machine, if such a need arises.
If desired, you can even remove the drum and tank. True, lifting the top cover alone in this case will not be enough. You will have to remove the front part and unscrew the service hatch at the back. However, the dismantling procedure will begin from the top.
Thus, the ability to remove the upper part of the washing machine body can be useful in many situations involving equipment breakdowns. This is the starting point for repairs of any complexity. The instructions will certainly be useful to the home handyman who does not want to overpay for the services of a technician.
Sometimes it becomes necessary to disassemble the Beko washing machine yourself, especially if a minor breakdown occurs. To carry out repairs, you need to get to the required part, and before that, partially disassemble the case. How to remove the top cover of a Beko washing machine? There will be no difficulties, just follow the instructions below.
Add a comment