Indesit washing machine bounces a lot during spin cycle

Indesit washing machine bounces a lot during spin cycle Most washing machines are capable of spinning the drum up to 1000 rpm, and sometimes even more. At high speeds, the only thing that can dampen such centrifugal force is heavy counterweights and shock absorption, but even these may not be enough, which is why increased vibration occurs. But a slight vibration of the body is one thing, and quite another when the Indesit washing machine jumps during the spin cycle. This is a signal that the equipment needs serious diagnostics, therefore, to prevent it from getting worse, it is very important to immediately begin troubleshooting and troubleshooting.

Why does equipment jump?

During washing, any machine shakes, but not very much, because the equipment can absorb most of the centrifugal force with the help of counterweights and shock absorption. Because of this, the SM operates without strong vibration and almost without noise, without interfering with everyday activities. The noise and vibration only increase during the spin cycle, but this is normal. If during the spin cycle the device stops vibrating and begins to shake or even jump, then there is clearly something wrong with it.

However, excessive shaking is not always caused by damage to the “home assistant”, because sometimes the user himself or the service center technician who installs the equipment is to blame. Fortunately, most of the reasons for this behavior can be eliminated with your own hands in a few minutes, without even contacting a repair service. Let's list all the situations that can cause this problem.

Incorrect installation of the washing machine.
An imbalance occurs in the device.
Overloading or underloading of laundry in the drum.
The transport bolts have not been removed.
Foreign objects such as keys, coins, hairpins, needles, buttons, bra underwires, etc. have entered the space between the drum and the tank.
The depreciation is broken, say, the springs or dampers are weakened.
Bearings are worn out.
The counterweights have deteriorated, for example, the retaining bolt has become loose or the concrete blocks have cracked.
The electric motor has failed.

The most important thing is that if you detect strong vibration, do not delay in eliminating the cause, so that the household appliance does not break down even more. Any problem can be dealt with if you follow detailed instructions and follow basic safety rules.

What is the best way to look for a problem?

Do not rush to immediately call a service center specialist, because the main causes of excessive shaking can be dealt with with your own hands at home. Therefore, you first need to conduct a thorough diagnosis of the washing machine, starting with the most basic problems, gradually moving on to more complex problems.

One of the most common is imbalance, that is, an imbalance of the drum, which leaves its trajectory and begins to hit the walls. This is what leads to such noise, vibration and jumping of the SM. An imbalance usually occurs in the following cases:

things in the drum gathered into one large lump, for example, penetrated into the duvet cover;
the owner of the equipment added too few items for washing, or vice versa - exceeded the maximum permissible weight;
The load of laundry is too light or too heavy to run a particular wash cycle.

Very often, service center specialists are faced with a situation where users do not remove the shipping bolts after purchasing a device.This case is relevant for new automatic washing machines, launched for the first time immediately after purchase. The user manual clearly states that starting the machine with transportation bolts is prohibited, as this can damage the internal components of the washer, so such an action will void the manufacturer's warranty.

The “home assistant” also shakes and jumps violently due to the fact that it was installed incorrectly. You can verify this if you try to swing the body of the machine yourself. If, with light pressure, the CM moves from its place, then the installation was carried out without observing safety measures, so the position of the unit should be leveled using an ordinary building level.

Another relatively simple cause of a malfunction is considered to be a foreign object that has gotten inside the device. To exclude this option, you need to open the hatch and manually turn the drum, simultaneously shining a flashlight through the tank of the machine. This will allow you to detect the foreign body that is causing the imbalance during operation. catch the bone through the drum

At this stage, we move on to serious problems that cause the washing machine to shake and bounce. First of all, this is shock absorption, which should reduce shaking and strong vibration. The fact is that during operation, the dampers wear out and the springs weaken, which is why the drum begins to hit the walls of the device, causing loud noise and jumping. Much the same thing happens when concrete counterweights are weakened or damaged. Well, if during operation the machine produces not a dull tapping sound, but a grinding or even clanging sound, then the problem should clearly be looked for in the bearings.

You should not open the case yourself if the warranty on the equipment is still valid - this will void it, because only a service center employee has the right to such serious repairs.

If the warranty has expired, and there is a problem with shaking, then you can remove the top panel of the washing machine yourself and inspect all the key components that may have a problem. When there is no imbalance or foreign objects in the tank, the shipping bolts have been removed, the “helper” is clearly at the building level, the bearings and shock absorption are normal, and even the counterweights are intact, then most likely the reason lies in the electric motor or a factory defect.

Fixing the problem yourself

You shouldn’t wait long after discovering a malfunction; it’s better to start repairing it right away so that using the washing machine is safe. The list of actions and necessary tools is always different, because it depends on the cause of the shaking. If you are going to correct the imbalance, then you will need:

end the current work cycle;
disconnect the machine from the power supply;
activate draining of waste liquid;

If suddenly the drain function does not work, then the water can be drained by removing the waste filter plug.

open the hatch and fix the problem in the drum yourself.

Most often, an imbalance appears due to an excessive amount of laundry, or vice versa – a lack of laundry for the selected work cycle. In this case, you need to add clothes or remove some things. In a situation where the laundry has gathered in a tight lump, you will have to break it up and carefully arrange the clothes so that they lie evenly in the drum. Only after this can you reconnect the washing machine to electricity and continue washing.

If the problem is due to instability, then you need to arm yourself with a building level and place it on the washing machine. This will allow you to accurately twist the legs of the device to level it. It would be even more effective to buy special anti-vibration pads and install them.

It is much more difficult to restore normal operation of the SM in a situation where foreign objects have entered the tank. You can try to pull them out using an improvised wire hook threaded into the hole between the tank and the drum. If this does not work out, then you will have to remove the back panel of the machine, remove the water heating element and remove the foreign body through the hole with your own hands.

When depreciation is damaged, it will not be possible to simply adjust the operation of the device, because parts will need to be replaced. Most likely, you will have to buy new dampers and springs, which should only be replaced in pairs, even in a situation where one of them seems to be working. This is hard work that should either be entrusted to a master, or done independently, carefully following the separate instructions. replacing the shock absorber through the bottom

If the counterweights are broken, then this will not be easy to deal with either. First, you will have to remove the top panel of the washing machine, and then inspect the units and retaining screws. Tighten the screws more tightly, and if there are small cracks or chips on the concrete blocks themselves, you can glue them together with glue. If the cracks are large or there are too many of them, then it is better to simply buy new counterweights. inspect the counterweights

Also, problems with jumping can occur due to bearing failure. If this happens, then they can only be replaced, which will require almost completely disassembling the household appliances.It is better to entrust this process to service center technicians, because the analysis is very complex and time-consuming, especially if you do not have informative instructions at hand.

The most unpleasant situation is when the electric motor is to blame. It is very difficult to diagnose this unit on your own without special experience and even more difficult to repair it. Usually it is easier and cheaper to deal with such a problem by simply purchasing a new washing machine.

Don't neglect good advice

It is always very important to respond promptly to a machine that shakes and jumps during operation. It is much easier to eliminate vibration and shaking than the subsequent damage caused by this problem. To prevent unpleasant consequences, follow simple recommendations.