If the bearing unit is in good working order, the machine washes more quietly and calmly. If the bearings are worn out, damaged and begin to collapse, then the picture will change greatly: the washer will “jump”, clang, grind and knock. In this case, you cannot do without replacing parts. Before you begin repairs, it is worth finding out how many bearings are installed in the washing machine and how to choose the right replacement. We will reveal all the answers below.
Number of elements
On both vertical and front-facing washing machines, the bearing assembly is considered one of the main mechanisms. It ensures the drum spins, affecting the quality of washing and spinning. The location of the bearings varies depending on the model and manufacturer: in the cross on the back or side of the drum.
The assembly consists of an oil seal and bearings. As a rule, there are two last elements: an outer ring of a larger diameter, which takes on the main load, and an inner, smaller one. But on some modern models from the LG and Samsung brands, the mechanism consists only of a reinforced double-row mono-bearing, which, due to its improved design, can work “for two”.
Plastic bearings are considered more reliable than metal ones: they are less subject to wear and last many times longer.
Bearings also differ in the material of manufacture and are divided into:
metal;
plastic.
Metal bearings are in great demand, since many consumers do not trust plastic, relying on the reliability and strength of metal. But in reality everything is different: plastic clips last longer.The whole secret is that such “rings” consist of two layers: steel on the inside, plastic on the outside. This increases the wear resistance of the part, allowing it to withstand significant loads without destroying the structure. By the way, it is these systems that are preferred by well-known, proven reliable brands LG, Bosch, Indesit and Samsung.
Number of parts on different machines
It is not difficult to determine the number of bearings on a washing machine. The surest way is to look at the factory instructions. The included user manual will be suitable for a specific washing machine, as well as for any machine from this manufacturer. You can also consult with sellers in household appliance stores or service center technicians.
The number and size of bearings are indicated in the factory instructions.
When counting bearings, you should focus on the manufacturer of washing equipment. A brief overview of the most popular brands will help with the calculations.
Indesit. Here the unit is equipped with two oil seals and bearings. Suitable sizes are 20x47x14 or 25x52x15 mm.
LG. Direct drive machines of this brand are equipped with bearings serial numbers 6204-6206.
Atlant. The original clips have serial numbers 6204-6206.
Samsung. Samsung bearings are marked 203-204.
Bosch. Bearing sizes vary among models. For most people, either 6203 or 6306 will do.
Ariston. You need to look for clips with serial numbers from 6203 to 6206.
Zanussi. When repairing a bearing assembly, components marked 6203-6206 are used.
As a rule, the number of bearings is specified when the unit needs to be replaced. It is worth understanding that most often the cause of failure lies in a damaged oil seal - an elastic band that protects the clip from moisture and friction.If the seal is leaky or torn, then water penetrates the crosspiece, washes out the lubricant and damages the system. In any case, it is necessary to change the parts as soon as possible, otherwise the drum and tank will suffer, which will increase the cost of repairs several times.
How not to make mistakes when buying?
Many manufacturers try to reduce the cost of repairing a washing machine and use standard bearings and seals. But it’s better not to take risks and check their quantity and size before purchasing components. The best option is to order original spare parts through the supplier’s official website after consultation with a specialist.
But experts recommend not to rush into the purchase and to first “open” the drum. In this case, you can take out the old bearings and find out the exact diameter using the markings stamped on the surface. If it was not possible to determine the dimensions, then we take the clips with us to a store or service center, and ask the consultant to select an analogue according to the sample.
The size and number of bearings in a washing machine depends on the manufacturer and model. To avoid mistakes, study the instructions or contact specialists.
If the bearing unit is in good working order, the machine washes more quietly and calmly. If the bearings are worn out, damaged and begin to collapse, then the picture will change greatly: the washer will “jump”, clang, grind and knock. In this case, you cannot do without replacing parts. Before you begin repairs, it is worth finding out how many bearings are installed in the washing machine and how to choose the right replacement. We will reveal all the answers below.
Add a comment