Why does water remain in the cuff of the washing machine?
At each stage of operation of the washing machine, water enters the tank. To avoid leaks, a special rubber seal is installed between the body and the door. It's called a cuff. But after washing, water remains in the elastic band of the washing machine. Equipment owners have to wipe away moisture after each shutdown. Why does it collect on the cuff and what are the dangers of the constant presence of water on the part?
How to prevent water from accumulating?
The design features of the rubber seal cause moisture to accumulate in the folds. There is no point in trying to prevent this. But it is necessary to thoroughly wipe the cuff after each use of the machine. Otherwise, mold will appear in the device and an unpleasant odor will arise.
Important! To ensure that the seal dries well, the machine door must be left ajar after washing.
If dirt has already accumulated on the cuff or mold has formed, the part should be cleaned. Regular wet cleaning with a cloth and water is not enough. Special cleaning agents must be used.
What chemicals should I buy?
If fungus has recently appeared on your washing machine, getting rid of it is easy. To do this, you should take a cleaning sponge, dip it in a solution of vinegar, bleach or soda solution and wipe all the folds of the cuff. It is more difficult to combat mold that has become deeply embedded in the rubber. To do this you will have to buy special household chemicals. Among the products available in retail stores, the following brands are considered the most effective.
Mellerud. Available in the form of a concentrated spray, contains chlorine. The composition is intended to destroy fungi.It can be used to disinfect walls, tiles, ceilings, and wooden surfaces. The product is also suitable for wiping the cuffs of washing machines. It’s easy to use: spray the spray at a distance of 5 cm from the dirt, leave for 15–20 minutes, then wash off with water. The cost of the bottle is $5.
H.G. A universal action spray based on surfactants and chlorine to remove fungus and odor and prevent the re-development of mold. The method of using the product is standard: it is sprayed onto the cuff of the washing machine. 10 minutes is enough to destroy fungal spores. After this time, the surface is washed abundantly with water. To combat stubborn dirt, the seal is cleaned several times. The cost of a bottle of spray is $4.
Bagi. The brand produces a spray called “Anti-mold” and offers an effective and quick way to remove mold. The product is sprayed and after 10–20 minutes, depending on the intensity of the contamination, it must be washed off. Due to the presence of nonionic surfactants and chlorine, it has an antifungal and antibacterial effect without damaging equipment parts.
Cillit BANG. Concentrated antifungal agent "Black Mold", safe and suitable for everyday cleaning, can be used if water accumulates in the hatch cuff and it needs to be cleaned and protected from mold. Also intended for washing shower cabins, bathtubs, sinks, kitchen sinks. The composition is sold in 750 ml containers. Price in stores is about 3-4 $.
Sion. Instant spray to combat fungus, remove spore stains and eliminate odors. It can be applied without pre-treatment.
BON. A product with antibacterial components and contains non-ionic surfactants.It fights not only fungus and putrid odor, but also limescale. The manufacturer recommends using the spray as follows: spray it at a distance of 20 cm from dirt, wait 20 minutes, clean the surface with a rag or brush, rinse well with clean water and wipe dry. The price of a bottle is about $5.
Unicum. A universal composition designed to remove fungus and unpleasant odors. Can be used without additional cleaners. Sold in stores for $2–3.
Most household chemicals against mold are made based on chlorine and surfactants. Many of them also have antibacterial properties.
Note! The products are safe for treating rubber seals.
How to properly clean a rubber band?
Mold most often appears in the folds at the bottom of the cuff because it is in this part that water accumulates. To remove it, you must perform the following steps.
Bend the edge of the elastic to the side.
Wet a rag or sponge with cleaning agent and wipe the entire cuff. Carefully walk through hard-to-reach places.
Close the washing machine door without rinsing off household chemicals. Leave for 30 minutes.
Then rinse the folds again and wipe them dry.
To make the treatment even more effective, you can run the “Cotton” or “Quick Wash” program. When the washing machine has finished operating, leave the door ajar. Aggressive detergents should not be used to clean the rubber cuff. They may damage the part.
At each stage of operation of the washing machine, water enters the tank. To avoid leaks, a special rubber seal is installed between the body and the door. It's called a cuff. But after washing, water remains in the elastic band of the washing machine. Equipment owners have to wipe away moisture after each shutdown. Why does it collect on the cuff and what are the dangers of the constant presence of water on the part?
Add a comment