Electrolux top loading washing machine programs

Before you start using your new washing machine, it is better to carefully study the instructions for the equipment. The manual notes all the nuances of installing and connecting the device, and also describes the washing modes of the Electrolux top-loading washing machine. Let's figure out what programs are in the memory of vertical systems and tell you about the features of their work.

Basic modes and their characteristics

In general, operating a vertical machine is no more difficult than a front-loading machine. The principle of activating the wash cycle is the same here - you need to sort the laundry, add detergent and select the desired mode. The dashboard of vertical Electroluxes is equipped with the usual rotary programmer and touch buttons for adjusting temperature, spin speed, etc.

Before testing the machine, be sure to open the instructions for it in Russian. It’s better not to be lazy and figure out the software “stuffing” of your new “home assistant”. Since mode settings vary depending on SMA models, and even more so, on the brand.

Depending on the SMA model, the same mode on Electrolux verticals may differ in spin speed, cycle duration and permissible load.

Why is that? For example, in the “Cotton” mode, the machine operates at maximum load. That is, if the drum is designed for 6 kg of laundry, that’s how many things can be put in it; if it’s rated for 7, that means seven. The same applies to the spin intensity.Cotton items can be spun at the highest speeds, so if the model provides a speed of up to 1300 rpm, it will connect, if only 800 rpm, then this setting will be activated.

The “Synthetic” mode allows the drum to be half loaded. Therefore, in Electrolux for 6 kg of laundry, if you choose this algorithm, you can put 3 kg of things. If the machine holds 8 kg of clothes, that means 4 kg of synthetic fabrics.

Let us describe the main algorithms found in the memory of modern Electroluxes with vertical loading.

• Cotton. Standard mode, which is available on absolutely any washing machine. The cycle temperature can be adjusted - from washing in cold water to 90°C. Ideal for white and colored cotton linen. The loading volume is the maximum allowed for the machine, the spin speed is also maximum. Approximate duration: 200 minutes.
• Cotton Eco. The washing temperature when starting this algorithm is 40 or 60 degrees - at the user’s choice. The cycle duration is maintained - about 200 minutes, while energy consumption is reduced by almost 2 times. Suitable for white and non-fading colored cotton items.
• Synthetics. The user can adjust the water heating - from 20 to 60 degrees. Only half the drum load is allowed. Mode for washing synthetic and mixed fabrics. The spin is performed at the maximum speed for the model. Approximate cycle duration is 105 minutes.
• Thin fabrics. Delicate program for the care of acrylic, viscose, polyester. Suitable for removing common stains. Washing degree – 40, drum load – half, cycle duration – 90 minutes.
• Wool. When starting this mode, you can load no more than 1 kg of clothing into the drum.The algorithm is suitable for woolen products, as well as items for which hand washing is recommended (this is indicated by the corresponding symbol on the label). The water is heated to 40°C, the cycle duration is 65 minutes.
• Jeans. Algorithm for caring for denim items, as well as knitted clothes and dark items. The user can choose the optimal washing temperature - 20, 40 or 60 degrees. The load for this program is half, the spin speed can be set to the maximum.
• Linen. A special mode provided on Electrolux machines. Designed for the care of fabrics that require the most careful handling. Ideal for bras and other underwear. Drum loading – no more than 1 kg, cycle temperature – 20 or 40 degrees.
• Silk. Special algorithm for silk and mixed synthetic fabrics. Washing is carried out at a temperature of 30°C. Only 1 kg of clothing can be loaded into the drum to achieve maximum effect. The spin is performed at medium speed.
• Curtains. Another special algorithm for Electrolux automatic machines. The pre-soaking phase is activated automatically in this case. Washing temperature – 40 °C, average spin speed, usually 800 rpm.
• Blankets. A separate algorithm for washing rugs, bedspreads, quilts or duvets. Only one product can be loaded into the machine at a time. The water is heated to 60°C, things are wrung out at a speed of 800 rpm.
• Sport. A program for the care of synthetic products and clothes that require careful handling. This mode will help you deal with minor stains or simply freshen things up. Washing temperature – 30°C, drum load – half.
• 5 Shirts. Special algorithm for washing blouses and shirts.You can load 1.5 kg of laundry into the drum, which is about five items. The water heats up a little - up to 30 degrees. This is a mode for combating light dirt.

You should select the washing mode based on the material from which the item is made, as well as the intensity of the dirt.

When starting delicate modes, the Electrolux vertical drum rotates slowly and more smoothly. Due to this, mechanical damage to tissue is prevented. An inexperienced user may even feel that the machine does not spin the container enough, but this is quite normal for the device.

Additional Algorithms

Depending on the model, Electrolux vertical cabinets have a certain set of auxiliary options. The purpose of additional functions is to improve the quality of washing and adjust the program to a specific situation. What algorithms are we talking about?

• Prewash. This adds a soaking phase to the main cycle. It is recommended to enable this option when loading heavily soiled items into the drum. The duration of the basic mode increases when this add-on is activated.
• Delayed start. This option will allow you to delay the start of the cycle for a period of time from 30 minutes to 20 hours. When activated, the corresponding icon will light up on the dashboard.
• Very quiet wash. When this function is activated, the machine skips all spin phases to perform a silent cycle.
• Additional rinse. It is better to enable this function in case of allergies to detergents or increased skin sensitivity. The option is designed to thoroughly wash out powder residues from fabric fibers.
• Easy ironing. When this option is activated, the vertical spins the drum more smoothly.The machine works so that as few wrinkles as possible form on the clothes - it reduces the spin speed and uses more water.
• Time manager. When you select a washing mode, the display shows its duration. Using the “-” and “+” buttons you can increase or decrease the cycle duration. This option is only compatible with some major programs.
• Child protection. Using this option, you can block the dashboard of the Electrolux washing machine. To activate the function, you need to hold down the “Prewash” and “Easy Iron” buttons.
• Sound accompaniment. An addition that will help you not to miss the moment of completion of the cycle. The signal will be given at the end of the wash, or in the event of a malfunction of the automatic machine.
• Constant additional rinsing. In order not to frequently activate this option, you can activate it once and for all subsequent cycles. To start the add-on, you need to hold down the “Prewash” and “Delay Start” buttons.
• Temperature. By pressing the corresponding button, you can change the degree of water heating provided by the default algorithm settings.
• Spin. Option to adjust the drum rotation speed at the final stage of the cycle. You can also activate the No Spin function.

You can see which washing modes a specific function is compatible with in the instructions for the Electrolux vertical washing machine.

It is better to understand the Electrolux software once, so that in the future you will be able to select the optimal cycle settings in each specific case. This will ensure the most efficient washing possible.

Daily use of the machine

There are also recommendations regarding the first start-up and daily use of the washing machine.They are also mentioned in the instructions. First, it’s worth understanding how the vertical system is put into operation.

The first cycle of the washing machine should be idle, with detergent, but without laundry in the drum. This is necessary so that internal dirt and grease are washed out of the machine without staining things. For a test cycle, it is better to choose the “Cotton” program Eco».

The manufacturer also provides recommendations in the instructions regarding the method of loading laundry. How to pawn things correctly:

• sort the laundry by color, fabric type and degree of soiling;
• open the cover of the machine;
• press the “A” button (then the drum will open);
• place items in the drum one at a time, shaking each item first;
• close the drum and the CMA cover.

Do not exceed the maximum laundry load weight specified by the manufacturer.

The detergent dispenser for Electrolux vertical washing machines has three compartments. The Roman l indicates the pre-wash compartment. The number ll is for the main wash. The flower symbol marks a tray for conditioner-rinse aid or starch composition.

After loading things into the drum and adding detergent, you can turn on the machine. Plug the power cord into a power outlet and press the power button. A beep will sound.

The mode is selected by turning the programmer. If necessary, at this stage you can adjust the washing temperature and spin speed. All additional functions that are required are also connected here (delayed start, super rinse, easy ironing, time manager, etc.).

The cycle is started by pressing the “Start” button. If necessary, during the first 10-15 minutes you can pause the algorithm and change the mode settings.To do this, the program is paused and then resumed.

The machine will beep when it has finished working. The vertical cover can be opened after a few seconds when the lock indicator goes out. Next, all that remains is to remove the clean laundry from the appliance and turn off the water valve.

The washing machine requires constant care. The outer surfaces of the case are wiped with a clean damp cloth as they become dirty. It is recommended to wipe the inside of the drum dry after each use of the vertical.

It is important to monitor the quality of tap water. If it is hard, then once every 3-4 months the machine must be descaled using special products. Otherwise, limescale deposits can cause damage to the SMA.

You also need to periodically clean the powder receptacle of the washing machine. It is pulled out of the washing machine and washed under running warm water. If you neglect this, detergent particles will settle on the walls of the cuvette and clog the pipes.

Finally, be sure to clean the drain filter every few months. It is located at the bottom of the drum. The part becomes clogged with pellets, threads and hair, which disrupts the flow of liquid into the sewer. The “trash bin” is washed in warm water.

Thus, there is nothing unusual in controlling the Electrolux vertical washing machine. All recommendations regarding the choice of programs and care are standard. However, it is better to read the instructions to understand the features of your particular Electrolux model.

Reader comments

• Share your opinion - leave a comment