DIY Vestel washing machine repair

Vestel washing machine repairTurkish Vestel automatic washing machines have been conquering the Russian market since 2006. There are few washing machine models produced, but those that are produced are worthy of attention and consumer reviews speak eloquently about this. Cases when Vestel washing machines require repairs are rare, but they do occur.

Over the past 9 years, service centers have developed a unique practice for repairing such machines and are happy to share information with you, because, in the end, most owners of broken equipment will turn to them.

What breaks more often?

Theoretically, anything can break in any automatic washing machine, and there are many reasons for this: improper operation, special operating conditions, low-quality parts, faulty assembly, etc. But these are rather one-time situations. According to service centers, each brand of washing machines has its own group of faults that constantly arise with this equipment. Turkish Vestel washing machines are no exception. What kind of breakdowns are typical for these machines?

  • The wash does not start. Although the control panel works, the machine turns on and the program is selected, but the start button does not respond.
  • Freezes after the wash starts. In this case, it is possible to select a program and start it, but after 5-10 minutes of operation the washing machine itself stops and stops responding to anything. In about half of the cases it produces error E07.
  • The machine does not remove any powder or detergent from the cuvette. Such malfunctions are not uncommon for new Vestel washing machines and they are not related to water quality or contamination.

This list of breakdowns of Vestel washing machines is, of course, not exhaustive.There are other malfunctions that may be worth discussing in a separate publication. Here we will talk only about the most common breakdowns of washing machines of this brand and will try to make the conversation as thorough as possible.

Wash won't start

Vestel washing machineThe vast majority of people, for some reason, think that if the washing program does not start and the start button on the control panel of the washing machine does not respond, then the problem is certainly in the electronics. Although the lights on the control panel are lit, the toggle switch works, and programs are selected. In fact, everything may turn out to be simpler; with Vestel washing machines, this happens in 40% of cases - The sensor of the hatch locking device breaks down, the control module believes that the hatch is not closed, so it does not start the wash, but it does not give an error either.

As a result, the hatch is closed, you press the start button, but nothing happens. Where to start looking for the cause of the problem? We recommend starting with the simplest.

  1. Turn off the washing machine, wait 10 seconds, then turn it on again. If the problem persists, turn it off and on again; if the problem persists, proceed to the next step.
  2. We disconnect the washing machine from the network, open the hatch cover and use a Phillips screwdriver to unscrew the two screws that are located near the locking device.
  3. Carefully remove the locking mechanism from the depths of the washing machine.

Important! The sensor wires are connected to the locking device; try not to tear them off.

  1. Next, take a multimeter and measure the resistance at the contacts of the locking device sensor.hatch blocking device The resistance of a working cold thermistor is 900 Ohms; if the device outputs 0 or 1, the blocking device is faulty.

Here is the main reason why the washing program does not start.Change the hatch locking device and everything will work fine. If the locking device is working properly, but there is a problem, then the problem is electrical. You will have to disassemble the control panel and check first the button, and then the microcircuit for damage, but it is better not to do this with your own hands - contact a specialist.

Freezes after starting the wash

Repair of Vestel washing machines may be required when the “home assistant” suddenly suddenly begins to freeze after the start of washing. Typically, such freezes occur after the first 5-10 minutes after the start of washing and 1-3 minutes before the end of washing. In this case, the washing machine does not freeze “tightly”, the drum sometimes “shows signs of life”, the control panel works, the lights are on, and the progress of the program is displayed on the display.

If error code E07 is not displayed on the control panel, proceed as follows.

  • We turn off the washing machine with our own hands, unplug the power cord from the socket, wait 30 seconds, and then plug the machine back in and start the washing program. If adjusting washing machine feetthe problem does not recur, which means that the error was resolved by rebooting the control board.
  • If the previous step does not help, try turning off the washing machine and checking whether it is level. A similar problem often occurs with Vestel washing machines that are placed on a crooked, unsupported floor.
  • The reason for freezing can also be the hatch locking device. Try to push the hatch with your knee, if the machine reacted and continued to execute the program, the problem is probably in the locking device, it needs to be checked and changed as described above.

For your information! Indirectly, problems with the hatch are indicated by its periodic jamming when opening.

The worst thing is if the freezes are repeated, and error E07 appears on the display. In this case, 99% of the problem is in the control board and you need to invite an experienced technician who will accurately diagnose the breakdown and issue a verdict. You won’t be able to fix this problem with your own hands, and we don’t recommend trying, since an unsuccessful attempt can result in even more expensive repairs.

Doesn't pick up powder or rinse aid

powder receptacleAnother fairly common problem with Vestel washing machines is that they suddenly start washing clothes without any powder at all, although the owners continue to regularly fill and pour detergent into the cuvette. Why does this happen, for what reason does the machine not pick up powder from the powder receptacle? In Vestel, the reason is in most cases the same - the water supply valve.

For some reason, Turkish washing machines often have filling valves that are defective from the factory. Moreover, this defect is tricky; it may not appear for some time, and then unexpectedly emerge, for example, after the end of the warranty period. What is the essence of the problem? When you start a wash program, the control module commands the fill valve to supply water to the tank. In normal mode, the valve should open and water begins to flow into the tank, then the valve closes and washing begins.

In our case, the valve also opens, but does not open completely. As a result, water takes longer to draw and with less pressure, practically not getting into the cuvette with powder. As a result, the powder remains undissolved and the quality of the wash drops significantly.

Note! For such brands of washing machines as Samsung, LG, Indesit, the self-diagnosis system recognizes a slow water supply, and if this happens, it generates a corresponding system error. The Vestel machine often does not recognize slow water intake.

Repairing a defective valve is useless; it needs to be replaced. How to do it?

  1. We purchase a new valve from the corresponding model of the Vestel washing machine.
  2. We disconnect the washing machine from the network, water supply and sewerage and pull it out of the niche in which it is built.
  3. Unscrew the screws holding the top cover and remove it. If you have problems with this, read the publication Removing the top cover of the washing machine.Vestel washing machine
  4. Under the cover where the inlet hose fits, you will see a plastic inlet valve. Disconnect the sensor wires from it.
  5. Next, unscrew the fasteners holding the valve with your own hands and remove it.
  6. Install a new one in place of the old valve, screw it on, connect the wires. Replace the cover, install and connect the machine, and check its operation.

In conclusion, we note that Turkish Vestel washing machines are of average quality, average parameters and do not break down very often. But if they do break, then in most cases, you can fix them with your own hands, the main thing is to have information about typical breakdowns and be able to recognize them. Good luck!

   

25 reader comments

  1. Gravatar Anonymous Anonymous:

    No power is supplied to the heating element. What could be the reason?

  2. Gravatar Ale Ale:

    The Vestel wm 834fs washing machine, having completed the washing cycle, spinning, starts at catastrophic speeds without sorting out the laundry. As a result, it starts jumping and turns off. I changed the module, nothing changed. What could it be?

  3. Gravatar Evgeniy Eugene:

    It picks up water but doesn't wash.

  4. Gravatar Win Win:

    Doesn't drain water completely

  5. Gravatar Sergey Sergey:

    In the middle of the wash, the rinse and end of program indicators begin to flash. According to the error codes, this is a malfunction of the heating element or temperature sensor, but the wash continues, goes through completely and the laundry is warm.

  6. Gravatar Denis Denis:

    With laundry (even with a small amount), it does not pick up speed for the spin cycle, cannot balance, and the empty one picks up speed.

  7. Gravatar Ravshan Ravshan:

    Doesn't drain water and gives error E 03.

  8. Gravatar Alesya Alesya:

    Vestel wm 1040 e4 stinks, how to clean the filters?

  9. Gravatar Vladimir Vladimir:

    VESTEL OWM 4110 LCD does not spin the drum.

    • Gravatar Sergey Sergey:

      If the error is E06, then most likely the brushes. It's easy to check, you put the washing machine on its side, and you can clearly see on the engine what condition they are in. Easy to replace. Two screws with a 10mm wrench and a screwdriver, two self-tapping screws on each brush.

    • Gravatar Alexey Alexei:

      Check the belt.

  10. Gravatar Sergey Sergey:

    The machine is 10 years old, quite repairable. Those. It's very easy to fix it yourself.
    During this time, I changed the brushes on the electric motor and the filler valves twice. Once the drain pump (you could only change the motor, I didn’t bother).

  11. Gravatar Alexander Alexander:

    The drum is loose, how to fix it?

  12. El's Gravatar Elya:

    Hello, my Vestel nikh1060 does not draw water. Please tell me what can be done?

  13. Gravatar Kostya Kostya:

    Power won't turn on

  14. Gravatar Vitalik Vitalik:

    The washing machine is Vestel f4wm840, it is half a year old. It picks up water, but doesn’t wash it off and immediately knocks it off. What is the reason?

  15. Gravatar Magomed Magomed:

    Hello, I have Vestel. As soon as I turn it on, it immediately starts pumping out and shows error E01. What could it be?

  16. Gravatar Sergey Sergey:

    It gives error E 01. The limit switch has been changed. The error remains. It won't start, what else could it be?

  17. Gravatar Raushan Raushan:

    Good evening, I have a Vestel washing machine. When 3 minutes remain, the start is switched off. I tried to cancel and put it on spin and drain, but it still stops 3-2 minutes before the end and I can’t get things out. I'm starting again. All the same. Tell me what needs to be done?

  18. Gravatar Ivan Ivan:

    The Vestel AWM 634 machine washes, but when it starts draining, the end indicator blinks. But the drain is happening.

  19. Alexei's Gravatar Alexei:

    Machine Vestel WMO840LE. The washing starts, after a minute it indicates that the washing is finished and turns off. The door did not lock.

  20. Gravatar Roman Novel:

    Machine Vestel vm840t. You start the wash, water fills in and the motor should start. The transistor immediately burns out, it stands alone and it is impossible to recognize its brand, is it possible to exchange it for our Russian one? Maybe someone knows? Help. The motor is in good working order and so are the brushes.

  21. Gravatar Ivan Ivan:

    The Vestel machine stopped spinning the drum in spin mode. What to do in this case?

  22. Gravatar Denis Denis:

    The Vestel machine does not turn on and the message End appears

  23. Gravatar Pavel Paul:

    Same garbage, did you solve the problem?

Add a comment

We recommend reading

Washing machine error codes