How to choose a belt for a washing machine?

How to choose a belt for a washing machine Choosing the right drive belt for a washing machine can be difficult. The fact is that after a break, the part may just remain a rubber fragment with rags, on which there will be no information. Such a damaged item will also not be suitable as a sample for purchasing a new product in a store. The best option is to find a belt based on the model of your washing machine, but it is important to remember some nuances.

Features of choosing a belt

Remnants of a damaged belt should not be disposed of as they may be needed. Even if it is impossible to read the symbols and numbers that are embossed on the surface, you can determine its type. In newer washing machine models, poly V-belts are installed. Their main feature is the presence of several strips for reliable coupling with the motor shaft, which are located on the inside.

Single V-type belt. On the motor shaft of the machines that have this part, there is no thread for reliable fastening. Because of this, the belt can slip and cause a lot of inconvenience to the owner of the equipment.

Important! Currently, wedge-shaped models are practically not produced.

Poly V-belts are divided into types depending on the distance between the strips: types of belts

J (2.34 mm between wedges);
H (1.6 mm).

The profile type is indicated by a letter on the belt itself. If such information is not available, you must take your own measurements. It is worth calculating how many wedges are provided on the remaining fragment of the part. For example, the J4 mark on the surface means that there are 4 stripes on the belt, located at a distance of 2.34 mm from each other. Length matters too. In most cases, it is not possible to determine it from a fragment of rubber. All that remains is to arm yourself with information about alphanumeric codes, the model of the washing machine and go to the store for a replacement.

Tips on choosing a belt from experts

One of the most important criteria is the length of the belt. If you choose one that is too short or long, it will jump off when the machine is running or even break. The type of profile used is also taken into account. For example, J will not fit in any way on a motor that requires H.

The number of wedges does not play a decisive role. The same models with identical article numbers, but differing in the numerical value next to the letter (H5 and H6, J2 and J3) are interchangeable. The more wedges a belt has, the less likely it is to slip. belt h5

If the belt is worn out or torn in a Bosch machine, and it is not possible to read the data specified by the manufacturer, most likely a new part 1192 J3 will do. All Samsung devices have straps of the same length (1270 J). Narrow machines have 3 profiles, medium and wide ones have 5. Thanks to this, you don’t have to worry about buying the wrong part; all standard options are presented in store catalogs.