Connecting the dryer to ventilation

Today, the most popular are condensation drying units with a heat pump. Thanks to this technology, there is no need to carry out any additional communications other than electrical ones. All you need to do is simply plug the machine into a power outlet and start drying your clothes. But ventilation-type dryers require the installation of an exhaust system that will remove all moisture directly to the street. Let's figure out how to connect a dryer to ventilation.

We put into operation a ventilation type dryer

The dryer is an important element in everyday life. However, when using a ventilation type machine, it is necessary to properly connect it to the system to ensure efficient operation and avoid problems with moisture leakage inside the room. This action is broken down into the following steps:

• Preparation;
• determining the installation location;
• pipe installation;
• connection to the ventilation system;
• testing.

Before you get started, make sure you have all the necessary materials and tools!

They include a ventilation pipe, corrugation, aluminum tape, fasteners, as well as a screwdriver, drill and sealant. Next, you will need to determine the optimal location to install your dryer. Typically, such devices remove moisture through the rear panel, so the installation location should provide easy access to it.

Once you have decided on the location, you need to connect the pipe through which moisture will be removed from the dryer.It is important to choose high-quality ventilation pipes with the appropriate diameter so that moisture removal is effective. Once the pipe is secured, it should be connected to the ventilation system. This process may require the installation of a special adapter or adapter, depending on the specific configuration of your ventilation system.

There is a hole on one side of the case to which you need to connect a flexible air duct. For this purpose, the kit includes a special clamp for fastening. The end of the corrugation must be led either into the central ventilation system or out the window, if there is none. It is important to note that bending the corrugation at an angle of 90 degrees is not recommended, as this can greatly reduce the efficiency of the hood. Therefore, try to ensure that the air duct has a minimum number of bends and turns.

Another important note - if you install the dryer in a room with high temperatures, do not vent the duct through the top. Condensation will collect and prevent air from escaping. It's better to resort to another option. For example, make a hole in the wall opposite the outlet from the device so that the area is horizontal.

Once installation is complete, a test connection must be carried out to ensure that moisture is being drained correctly from the dryer into the ventilation system. To do this, you need to run the unit for a short cycle and check how it is removed. Don't forget to also make sure that the vent pipe is securely fastened and the connection is made according to the dryer manufacturer's recommendations. After this, the installation can be considered complete.This whole process seems complicated, but if you carefully follow the steps listed and, if you have difficulties, seek help from professionals, this problem can be effectively solved.

Aceline DM-AV8WI/WB

Today you can rarely find ventilation machines in stores, but they have certain advantages over other types of dryers. Let us draw your attention to such a device as Aceline DM-AV8WI/WB. It costs only $240, but is capable of drying up to 8 kg of laundry in a few hours. The ventilation drying type is equipped with a 102-liter drum with reverse rotation, which avoids wrinkles on the fabric and simplifies subsequent ironing. The built-in filter catches small particles, dust and lint, so that during operation of the device they are blown out of the laundry.

The drum is made of galvanized steel and is resistant to corrosion. The electronic control panel is one of the distinctive features of this dryer. It allows you to easily select the desired drying program and adjust the parameters according to the type of fabric, thereby ensuring high-quality results. The device offers 11 different options, including programs for delicate fabrics, synthetics, cotton and other materials. This gives the user the opportunity to accurately select the optimal mode for each type of laundry.

Another feature of the Aceline DM-AV8WI/WB is the presence of an anti-foam mode. At the end of the drying cycle, the drum maintains movement at a low speed, preventing wrinkles and pinching of fabrics. This allows you to minimize the amount of time that the user will have to spend ironing clothes.

Another important characteristic of the model is the lighting inside the drum.It makes loading and unloading laundry easier. Now the user can easily see what is happening inside the drum and make sure that everything has been removed.

The modern design of the Aceline dryer is also noteworthy. Its stylish appearance not only adds beauty to the room in which the dryer is located, but also emphasizes the innovative nature of the device. Taking efficiency and comfort to a new level, the dryer from this brand becomes an indispensable assistant for caring for your laundry. Reliability and functionality make it an excellent choice for modern users.

   

Reader comments

• Share your opinion - leave a comment