Cleaning a Samsung washing machine from dirt

Everyone dreams of a washing machine working smoothly, performing cycle after cycle, doing an excellent job of getting rid of dirt on clothes. But do not forget that the “home assistant” herself needs timely care. Be sure to not only wipe the washing machine body, the hatch door, the surface of the drum and rinse the powder receptacle. Periodically it is necessary to clean the washing machine from dirt inside. Let's figure out how to properly care for the machine.

Why bother with cleaning?

Although the main function of the washing machine is to “give” clean and fresh laundry to the housewife, the condition of the equipment may not be sterile. If the machine is not cleaned, dirt will accumulate inside, on the elements, and scale will form. Mold spots often appear on the drum cuff, since wet rubber is an ideal place for fungal microorganisms to live. If you take the heating element out of the machine, you may be surprised at the thick layer of plaque covering the tubular heater.

Contamination on the internal elements of the Samsung SMA appears due to:

• excessive mineralization of tap water;
• use of aggressive low-quality laundry detergents;
• improper operation of equipment;
• putting heavily dirty clothes into the drum (for example, overalls with stains from machine oil, things from working in the garden, etc.).

To return the equipment to factory condition, periodic complete cleaning of the Samsung washing machine is necessary. General cleaning begins with the body of the device and ends with its “insides”.

To wipe the body of the machine, a damp cloth or sponge will be enough.Liquid stains, traces of powder, dust, and lint from the hatch door can be easily removed in this way. To properly clean the “insides” of the washer, you will have to work hard. But such work will certainly be rewarded with the impeccable operation of the automatic machine.

Taking care of the cleanliness of the heater: home remedies

Quite often, the machine suddenly refuses to work due to a breakdown of the heating element. If you do not take care of the equipment, then the heating element, after some time of using the washing machine, will become covered with a thick layer of scale and fail. Tap water contains a lot of calcium and magnesium salts, which “stick” to the tubular heater.

If an additional softening filter is not installed at the entrance to the machine, you should start “preventing” SMA once a month using special means.

You can purchase special formulations, such as Calgon, and add them to the powder in one of the wash cycles. This must be done once every 4 weeks. Such preventive measures will help prevent scale formation on the heating element.

A cheaper way to combat salt deposits is to use citric acid. You need to pour “lemon” into the washing powder compartment, then start any high-temperature washing mode. The principle of operation is simple: acid, dissolving in hot water, corrodes scale, freeing the heating element and steel drum container from lime deposits. It’s easy to calculate the required amount of lemon juice - about 30 grams of acid are required for one kilogram of washing machine load.

If you have been cleaning your Samsung washing machine for a long time, you can resort to this method: pour citric acid into the powder receptacle and run a washing program that requires heating from 90°C or more. In the middle of the cycle, unplug the machine's power cord from the outlet. In this state, the equipment should be left overnight, and the washing machine should be started again in the morning.

There is only one drawback of this cleaning method - if there is too much scale, then fallen pieces of plaque can damage the internal elements of the machine. In addition, fallen scale can get stuck in the drain system. This will cause a blockage, which can only be eliminated by disassembling the machine.

There are alternative products to “lemon” that housewives use when cleaning the SMA:

• Acetic acid. One or two glasses of table vinegar (9%) are poured into the powder tray. Next, you should select a high-temperature wash program that involves soaking. After the procedure, the machine may emit a specific “vinegar” aroma, which is easily removed by additional rinsing.
• Soda + vinegar. Two powerful components in a duet will give an amazing effect. A solution (half a glass of baking soda diluted in the same amount of water) is poured into the detergent cuvette. Pour a glass of nine percent acetic acid into the drum. Then you need to put the machine into operation, selecting the mode with maximum water heating.
• White. The product has long been used to disinfect washing equipment. Some housewives prefer chlorine-containing compounds.

However, when using caustic agents such as bleach, you should be very careful.The effectiveness of such compositions is questionable - they will not get rid of scale, but they will damage some parts of the washing machine, for example, the sealing cuff or rubber gaskets can easily. In addition, chlorine vapors are quite dangerous for humans.

Factory cleaning products

Today in stores you can find various household chemicals aimed at caring for washing equipment. A cleaning product for an automatic machine must be harmless to humans, safe for fabrics, and at the same time effective against scale and other contaminants.

Special compositions, in comparison with folk remedies, have an advantage - they are designed taking into account the design features of washing machines. Therefore, you don't have to worry about the components cleaning some parts while damaging others. Let's present a rating of effective and safe products for cleaning the SMA.

1. Topperr 3004 is a German cleaner that does an excellent job of removing scale. Can be used for both washing machines and dishwashers. The product is recommended by the manufacturer Bosh.
2. Schnell Entkalker is another German development. The powder is used for quick cleaning of the “insides” of automatic machines. Fights stubborn limescale deposits.
3. Antikalk for Washing Machines from The product is produced in Israel. The manufacturer positions the composition as a universal gel for preventive care for SMA. Copes with small deposits and has a high antibacterial effect.
4. Magic Power is a specialized composition for cleaning automatic machines. Available in two forms: powder or gel. Effectively fights plaque on the heater, tank, drum container.
5. Beckmann is a German development.The composition protects against scale and helps cope with unpleasant odors. A multidisciplinary product is suitable for preventative care rather than for removing severe deposits.
6. Filtero 601. Manufactured in Germany, it copes well with old plaque. The manufacturer recommends using the product no more than 4 times a year specifically for intensive cleaning of equipment. It has very convenient packaging - a 200 gram package is just enough for one-time use.
7. Doctor TEN (Russian manufacturer) and Antinakipin (Belarus). Powders aimed at combating scale. They are focused exclusively on removing deposits, but can be used not only in washing machines, but also in dishwashers. They are distinguished by their low price.

Many advertised products do not get rid of existing scale, but only prevent the appearance of new plaque.

Therefore, when choosing a cleanser, be sure to pay attention to the principle of its action. For example, Calgon does not fight plaque, but only reduces the concentration of salts in tap water, thereby preventing scale from appearing. At the same time, it will not remove existing deposits.

It is easy to identify such compositions - they are used as an additional component, added to the tray along with washing powder. Products for intensive cleaning of the internal elements of the washing machine are used separately, outside the laundry cycle.

Removing the drum from dirt

At the end of the wash cycle, the walls of the drum remain wet and dirt settles on them. Moisture also accumulates in the sealing collar, where mold often appears. The drum may smell unpleasantly musty.

Idle running of the washing machine using specialized cleaning compounds will help you cope with the “aroma”. Or you can add citric acid to the cuvette. The cuff is cleaned by hand. After completing the wash, bend the edges of the elastic and wipe the indentations with a cloth soaked in soapy water. Afterwards the seal is wiped dry.

If you find mold stains on the cuff, immediately treat them either with a special product or with a homemade “gruel.” To prepare a cleaning paste you will need baking soda and water. The components are mixed in equal proportions. The gruel is applied to the affected areas of the seal; the surface of the drum can also be treated with the mixture. The paste should be left for two hours, and then removed with a damp sponge and run one of the washing programs.

Drainage system

Small debris forgotten in pockets, threads, hair, wool fibers - all this clogs the drain system of the machine. It is important to periodically clean the garbage filter to avoid problems with the operation of the machine. This should be done at least once every three months. If the machine is used daily, it is better to clean it more often.

Safety precautions should be observed - before cleaning the drainage system, be sure to turn off the power to the equipment.

The drain filter is hidden behind a special panel located in the lower right corner on the front wall of the case. It is better to place a small container under the machine to collect the water that flows when unscrewing the filter, and cover the floor with a rag. The filter element is unscrewed from right to left. It is necessary to rinse it under high pressure water, wipe the hole formed in the machine after removing the part.

Be sure to clean the drain hose as well.After the remaining water has been drained from the system, you can disconnect the hose from the siphon or sewer, and then from the machine.

Powder receiver

The detergent tray is another element of the SM that constantly needs cleaning. It is better to wash the powder container after each use of the equipment. This way you can prevent the appearance of plaque on the walls of the cuvette and the formation of mold.

If the powder receptacle has not been cleaned for a long time, “heavy artillery” is used. You can treat sections with a chlorine-containing compound. It is possible to remove plaque and mold from the dispenser using citric acid. To do this, you need to pour a bag of lemon juice into a basin, add hot water and place a tray in the solution, it should lie there for several hours. The container is then cleaned with a stiff sponge or toothbrush. It is important to wipe the powder receptacle dry after cleaning and keep it open while the machine is not in use.

Reader comments

• Share your opinion - leave a comment