First launch of the Indesit washing machine

The dream of buying a washing machine has been fulfilled - the new machine has been delivered from the store and is ready for use. Before throwing laundry into the drum and starting the wash, the user must complete a set of mandatory measures. The upcoming algorithm of actions is described in detail in the instructions for the equipment.

Before using your Indesit washing machine for the first time, be sure to read the user manual. There are quite a lot of nuances, from removing shipping bolts to the optimal location of the washing machine hoses. Let's figure out how to put the machine into operation correctly.

Let's make sure the machine is ready

The first wash will go “like clockwork” if you follow the instructions strictly. Be sure to read the user manual with the basic rules for operating the automatic machine. It is also better to immediately understand the icons on the dashboard by reading what each symbol is responsible for and finding out what modes and options are provided in the washing machine.

After the new washing machine is delivered from the store, you must:

• remove the transport bolts;
• connect the machine to communications;
• level the washing machine;
• wipe the inner surface of the drum with a damp cloth;
• remove the factory stickers and run a test cycle.

It is important not to forget to unscrew the transport bolts holding the washing machine drum.

Transport bolts are provided to secure the SMA drum. It is important that during transportation the “insides” of the machine do not hit each other.It is forbidden to start the machine with the screws not removed - the engine will spin the stationary “centrifuge”, it will resist, so not only the container itself will suffer, but also the bearings, shock absorbers and other elements.

The instructions tell you how to properly remove the transport bolts. Their number and location on a specific Indesit model are also indicated there. After removing the screws, special plugs that come with the washing machine are inserted into the holes.

If you run the first wash without removing the shipping bolts, you can’t count on warranty repairs. Since the breakdown occurs due to user negligence, the service center will refuse free service.

The next step is installing the washing machine. Ideally, specialists should handle the connection. It is important to level the housing, position the drain hose correctly, connect the device to the communications, and securely fasten the clamps to the pipes. The machine will vibrate during operation, and a loose connection may cause a leak.

After installation, you need to clean the washer drum with a damp cloth. Dust and dirt are also removed from the body of the machine. Carefully remove all stickers provided by the manufacturer. Then the machine is wiped dry.

The washing machine is now ready for its first wash. Of course, it’s too early to load things into the machine. To begin with, a technical launch is carried out. Let's tell you what it is and why it is needed.

Washing internal elements

After reading the user manual and preparing the machine, you can start the first cycle. Turning on the washing machine is very simple. It is necessary to insert the power cord into the outlet, turn the shut-off valve and press the “Start” button.Let's figure out how a test wash differs from a regular wash.

Technical start-up is the first cycle of the washing machine, carried out without laundry in the drum. Why do you need a dry wash? She helps:

• wash factory dirt from the washing machine elements;
• remove unpleasant, technical smell;
• check if the washing machine is working properly. (You can observe how the machine draws and drains water, whether it makes a lot of noise during operation, whether there is excessive vibration, etc.).

The first wash is carried out without laundry in the drum, but with the addition of powder or gel.

Why does the loop run "idle"? If you start the first wash with clothes, you can stain the laundry with grease or other technical liquids. Therefore, it is better not to take risks, but to “drive away” the washing machine empty. Detergent must be poured into the powder receptacle - it will help to rinse the machine better.

If during the technical startup any problem is noticed, for example, a leak, a program freezes, or a non-working pump, you must immediately complete the cycle and call a service center specialist. During the year, the buyer has the right to free warranty service; Indesit will identify the malfunction and fix it at its own expense.

As for the idle wash mode, you can select any high-temperature algorithm lasting at least two hours. This is necessary to better rinse the inside of the machine. During further operation, the program is selected depending on the type of fabric, color and degree of soiling of the laundry.

Modern Indesit machines have many special programs and functions in their memory, so choosing the optimal cycle parameters for any type of fabric is not difficult.

The names or designations of the washing modes are on the dashboard.You can intuitively guess what a particular program is intended for, but it’s better to look at the instructions for the equipment. There is a description of all the options. The user manual tells you which fabrics are best washed using a certain algorithm, to what degree the water is heated, and what spin speed corresponds to it.

Having understood the programs, you can start the wash. For this:

• connect the machine to electricity;
• turn the shut-off valve;
• load things into the drum (it is important not to exceed the maximum permissible load weight);
• close the hatch;
• pour powder into the cuvette or fill in washing gel;
• use the programmer to select the desired washing mode;
• adjust cycle settings if necessary;
• Click the "Start" button.

After this, the machine will start washing things. Indesit slot machines notify users about the end of the cycle with a pleasant melody. The hatch door will unlock 2-3 minutes after the sound signal. You should not pull the handle ahead of time, otherwise it will easily break.

Learn how to add funds correctly

It is very important to choose the right detergents for washing. Low-quality powders and gels not only do not remove dirt, but are also quite capable of harming the automatic washing machine. In addition, you need to learn how to dose the formulations so as not to “overdo it” with the concentrate.

The Indesit washing machine dispenser is divided into three compartments. Powder for the main wash is poured into one, and conditioner used during rinsing is poured into the other. The third section is for pre-soaking detergent.

It is important not to confuse the sections of the powder receptacle; be sure to look in the instructions to see which compartment is intended for which product.

When choosing detergents, follow these rules:

• Only powders and gels labeled “Automatic” are suitable for the washing machine;
• choose high-quality compositions, preferably biodegradable and hypoallergenic;
• for delicate fabrics it is better to use special liquid products that dissolve well in cool water;
• It is advisable to purchase separate detergents for washing black, white and colored laundry;
• It’s better to avoid buying household chemicals of questionable quality.

It is very important to dose the powder correctly. Too much detergent will cause excessive foaming, which is extremely harmful for the washing machine. If there are not enough granules, the stains will not be removed.

Modern Indesit machines allow the use of tablets, capsules and napkins for washing. Read on the packaging for instructions on how to properly use the formulations in this form. They are placed directly into the drum before the program starts.

The first start of the Indesit automatic machine should be carried out in exactly this order. If you follow the instructions, putting the washing machine into operation will go without any problems. The main thing is to follow all the rules for installing and connecting equipment.

Reader comments

• Share your opinion - leave a comment