First launch of a Bosch washing machine

After installing the washing machine and connecting it to the water supply, you want to quickly throw a batch of clothes into it and check the quality of the wash. However, there is no need to rush; the first start-up of a Bosch washing machine should be carried out strictly according to the manufacturer’s instructions. If you ignore the recommendations, you can get serious problems in the further operation of the equipment.

Initial steps

So, when washing for the first time, you must first inspect the equipment and make sure that it is ready for use. Also, do not forget to open the instructions and learn the basics of operating the washing machine. Familiarize yourself with the available capabilities and basic programs. Before turning on the washing machine, pay attention to the following details.

• Check that the hoses are securely fastened. The drain must be installed particularly firmly. When removing used water from the washer, it can jump out and flood the bathroom.
• See if everything is transport bolts removed. They are necessary to protect home appliances during transportation, but must be removed before work. In their place, special plugs are inserted into the holes, which you will find included with the washing machine. If even one temporary bolt is left in place, it may cause a breakdown. In order not to be mistaken with their quantity, refer to the manufacturer's instructions.
• Open the hatch and inspect the washer drum. You need to make sure that there are no foreign things inside.
• Remove all adhesive tape from the body of the machine. It is used for fixing parts of household appliances.

Note! If the intelligence control is handled incorrectly, the operation of the main control module can be seriously disrupted.

At the end of the inspection before the first wash, open the valve on the inlet hose. This is required to draw water from the water supply. After this, you can turn on the machine for the first time and use it for its intended purpose.

We put the equipment into operation

Manufacturer Bosch recommends not to wash things immediately, but to do a dry run. In addition, you need to constantly be nearby and monitor the process. This will help you quickly respond to a possible problem with the washing machine.

What is the correct procedure when starting the washing machine for the first time:

• plug in the washing machine;
• close the hatch until it clicks;
• pour washing powder or special gel into the desired compartment of the tray;
• select a program by turning the knob or pressing the buttons on the panel (frequently used mode is best);
• wait while the machine finishes washing;
• inspect the washing machine and hoses; there should be no water leaks anywhere.

While washing for the first time, listen to the operation of the equipment. Pay special attention to the presence of extraneous noise. During normal operation of the washing machine there should be no hum or grinding noise. After finishing washing, check to see if there are any smudges underneath.

Excessive vibration and bouncing of equipment should also alert you. If it shakes and moves out of place during the washing process, check whether the installation was carried out correctly. The reason for this behavior may be an uneven floor in the bathroom.

Important! If you notice strange noises, grinding or humming noises during your first wash, you should call a service technician.

For the first time, it is not recommended to immediately put things into the washing machine. The fact is that internal surfaces, hoses and other parts can be contaminated with technical fluids or oils. It’s easy to get a couple of stains on your clothes, which will be difficult to remove. In addition, the main purpose of the first wash is to check the serviceability of the equipment and eliminate possible problems.

You can also wash things

After you have done the first wash and made sure the machine is working properly, you can start loading things. The internal parts of the washer have been washed well and are ready for real work. Sort your dirty laundry into whites, blacks and colours, then start washing.

1. Before turning on the equipment, make sure that you do not exceed the maximum permissible load weight. Do not overload the drum, as this can easily damage the machine.
2. Close the hatch door and pour the powder into the special tray. The main wash is marked with the number II; this is where the dry detergent is loaded. The middle section is for liquid conditioners.
3. After this, you can turn on the washing machine. Select the operating mode depending on the load of laundry. If necessary, adjust the temperature and spin speed.
4. Press the start button.
5. When the wash is finished, remove clean laundry from the drum.

As you can see, there is nothing complicated in the first wash. But the owner of the equipment needs to handle it carefully and be sure to study the instructions before use. Also, do not neglect the safety requirements established by the manufacturer.

1 reader comment

1. 02/24/2023 at 00:57

   Hope:

   How to open the door of a Bosch washing machine for the first time? There is no handle as such. Just pull where the handle should be. It's not written anywhere.

   Answer