First launch of Siemens dishwasher

First launch of Siemens dishwasher As practice shows, many housewives do not study the instructions immediately after purchasing household appliances, but rush to use the new “home assistant” as quickly as possible. In this case, starting up a Siemens dishwasher for the first time can bring more trouble than joy, because you can accidentally damage both the dishes and the dishwasher itself. To do everything correctly, you should first study the user manual, and if for some reason you don’t have the brochure at hand, then you should read our cheat sheet.

“Idle” activation of the Siemens dishwasher

To properly start the dishwasher for the first time, just load it with all the necessary household chemicals, but do not put dirty dishes in it. Many users think that this makes no sense, and this procedure only wastes electricity, but this is not the case.

The idle cycle allows you to clean the “insides” of the machine from oil, dirt and debris that may have remained during the assembly of the equipment at the factory and subsequent storage in a warehouse or storefront.
The test will also clearly demonstrate the performance of the machine - whether it draws and heats water normally, whether it drains all waste liquid well, and whether water remains in the chamber after drying.
This is also an opportunity to check whether the machine is installed correctly, whether there are any problems with connecting to all communications, and whether the wire or hose is squashed.

You should not think that since idle starting is carried out without dishes, then household chemicals are not needed, because there is nothing to wash.Detergent and special salt must be loaded for the test cycle, because the first will help wash away all contaminants, and the second will prevent the ion exchanger from deteriorating.

Let's start with the most important thing - salt. A Siemens dishwasher needs it if your locality has hard tap water. Salt will restore the softening functions of the ion exchanger, which takes the brunt of low-quality water. To add salt: How often should you put salt in the dishwasher?

open the dishwasher door, find the salt bin at the bottom and unscrew its lid;
pour about a liter of water inside, and then add about a kilogram of special salt;

Do not use regular table salt for dishwashers, as it does not undergo such thorough cleaning as industrial salt, plus its granules are smaller, so it copes much worse with the reducing functions of the ion exchanger.

If some salt solution spills from the reservoir, wipe the water with a cloth and run a cycle to remove any remaining salt from the bottom of the wash chamber.

To reduce or increase your salt intake, you need to know the quality of your tap water. You can find out yourself by using test strips, which often come with household appliances. If there is nothing for testing at home, then you can look at the Internet portal of the local water utility, where the utility service should post up-to-date information about hardness and other water parameters.

Now load the machine with detergent, which can be in the form of a powder, gel, tablet or capsule. They should be added to separate compartments located on the washing chamber door.On the same door next to it there is also a rinse aid dispenser, which helps the dishes shine. After loading the chemicals, be sure to turn on the PMM and record on the control panel which type of detergent you have chosen. Siemens dishwasher programs

Now all that remains is to turn on the idle wash. Select the longest mode that uses water at the highest temperature - an intensive wash program is suitable. Click on the "Start" button.

Washing dishes for the first time

When the test is completed, the equipment should be given several hours to cool and dry. This should be done with the door open so that the moisture evaporates better and mold and an unpleasant odor do not appear inside the washing chamber over time. Also, you should not run the PMM without interruption in order not to overload the heating element and the pump. cleaning dishes before placing them in the PMM

When your Siemens dishwasher is ready to use, fill the baskets with dirty dishes so that nothing blocks the movement of the spray arms, and there is a small gap between the items so that water has free access to all surfaces. Check whether there are enough detergents for the job and start washing.

Never load dishes with leftover food, napkins, seeds, tea leaves, coffee grounds and other debris - all this must first be removed with your own hands so as not to clog the dishwasher filter.

Starting a dishwasher for the first time can be difficult, but over time you will learn how to properly arrange cutlery in the washing chamber, and the whole process will take no more than five minutes.

Rules for working with Siemens PMM

The correct first start helps to extend the “life” of the equipment, but this is far from the only thing worth doing to increase the service life of the PMM.Carefully read the following recommendations from experts so that your equipment will serve you for many years.

Do not touch the machine with wet hands while working.
It is advisable not to use an adapter or extension cord to connect equipment to the electrical network.
Keep a close eye on any foreign objects in the wash chamber.
Show children how to use appliances correctly so that they do not accidentally damage the appliance or utensils.
After each operating cycle, manually clean the debris filter by rinsing it under powerful tap water.
Regularly clean the rubber door seals from food residues and grease.

Never rush to use complex household appliances immediately after purchase without reading the user manual. It is always better to spend ten minutes reading the instructions than to spend money on repairs later.