How to turn off the beep on a Siemens washing machine?

How to turn off the beep on a Siemens washing machine Siemens washing machines often make sounds that particularly demanding users may not like. After finishing the wash, the machine emits a nasty squeaking signal about 10 times at intervals of a minute, which can be clearly heard even through a closed door. Some owners get so irritated that in a fit of anger they can damage the equipment with a sharp object that happens to be at hand. We will tell you how to turn off the sound on a Siemens washing machine without damaging the household appliance.

Disconnection instructions

Technical documentation often does not contain direct recommendations on how to turn off an unpleasant signal without disassembling the equipment. However, this does not mean that you cannot get rid of sound in this way. Let's take the Siemens washing machine model WD 14 H 441 OE as an example and try to turn off the sound signal step by step.

Turn the machine control to the “Off” or “0” position and hold it in this position for 5 seconds.
Set the selector to the first program (“Cotton”) by turning it to the right one step + hold the temperature adjustment button.
Scroll the programmer one step further, setting the second mode, and release the temperature button.
Now click on the timer and select the volume level.
The sound is controlled by the program selector and can range from 0 to 4 - you need to select zero.
Press the timer again and return the control to the “Off” position.

Important! When setting up, problems may arise due to the temperature key; it should be pressed especially “gently”, so that the t values sequentially change on the display (from 90 degrees to an asterisk).

Sometimes, during the process of adjusting the sound, the machine keys may freeze and not respond to the user’s manipulations. In this case, you should return the regulator to its original position and start the operation again. It is necessary to turn off the selector to remember the settings.

Mechanical speaker mute

You can turn off the sound signal using this method only on modern Siemens models. With old washing machines, you can only remove the sound of the keys. But after the end of the working cycle, the machine will still play the standard melody. Speakers located outside can be simply neutralized by covering them with tape or covering them with sound-absorbing material. However, in the washing machine Siemens The speaker is located in the control module. To get rid of the intrusive sound, you will have to partially disassemble the washing machine. sound source on board

Start with simple steps: unplug the equipment from the power supply, disconnect the hoses from the sewer and water supply. Turn the back of the household appliance towards you to provide access to the desired part of the housing. Remove the bolts holding the top panel of the MCA. Go to the front side and take out the washing powder dispenser. To do this, find and unscrew two bolts in the resulting niche. Another fastening element is located in the top left corner. Now carefully remove the electronic control unit.

Turn the panel over and unscrew the screws securing the board to the block. Carefully turn the electrical circuit so that the front side is facing you. Try not to damage the thin wiring connecting the parts of the machine and its electronic component.

Inspect the board for a speaker. The latter is usually located next to the toggle switch. Using a soldering iron, disconnect the speaker from the circuit.If you are afraid of damaging important elements, simply coat the sound source with a layer of epoxy resin. This will allow you to turn off the melody without compromising the integrity of the electronic board.