How to make a fireplace from a washing machine drum?

How to make a fireplace from a washing machine drum You can make many useful gadgets from old household appliances. So, it’s not difficult to make a fireplace from the drum of a washing machine - just turn the container over with the hole up and fix it on the ground. The stainless steel cylinder walls will withstand high temperatures, and the perforations will provide the necessary air conditioning. The smooth edges of the tank are also used, on which utensils are placed for cooking. Moreover, such a stove is easy to improve by modifying it with a few details.

The simplest hearth on legs

It’s quite simple to make a hearth for your summer house from a washing machine drum with your own hands. If the machine has not yet been disassembled, you will first have to remove the cylinder from the body, freeing it from the plastic tank, drain pipe and other elements. Then we begin collecting consumables and equipment. You will need the container itself, as well as the cross that comes with it.. The tools you will need are a grinder, a screwdriver and a drill.

A hearth is made from a drum according to the following instructions:

prepare the drum (remove plastic fins, bearings, shaft and other elements);
clean the container from soap scum and dirt;
cut off the crosspiece with a grinder so that the longest rectangular pieces of metal remain;
grind off the parts of the cross remaining at the bottom of the drum with a grinder;
trim the sections of the crosspiece and sand it with a grinder - these are the future legs of the fireplace;
drill holes in the upper part of each leg with a drill for subsequent attachment to the drum;
Using a screwdriver, secure the legs to the bottom of the drum.

To decorate a fireplace made from a washing drum, only heat-resistant paints and enamels are used.

All! All that remains is to put the fireplace on its legs and paint it. The walls of the homemade product are prepared for painting: dirt and dust are removed, rust is removed, the surface is sanded and degreased. Afterwards, the product is coated with heat-resistant paint designed for temperatures from 300 degrees. It is recommended to choose products from Thermika, Dufa, Elcon and Tikkurila. It is better to give preference to dark colors: silver or black.

The resulting hearth can be improved. So, throwing firewood into the firebox will be easier and more convenient if you provide a door. To do this, you will need to cut a rectangular hole in the side wall, screw the hinges to the piece, and then install the lyada back. You will get a special “window” for access to the stove, which will eliminate the need to throw fuel on top, removing dishes or grates.

Different hearth designs

If a simple hearth on legs seems too boring, then you can modify your homemade product. Decorating the “base” is simple: just experiment with the base, top part or the entire surface of the drum. The most suitable option is selected depending on personal preferences, available materials and desired functionality.

Unusual base. Unsightly legs made of crosses or metal plates can be replaced with openwork stands made of twigs. For example, a fireplace placed on poles bent in the shape of the letter “S” looks impressive. Elongated or asymmetrical supports look beautiful, as do bricks and even an iron base from an old chair.
Grate on top. You can not only make a fireplace in your dacha, but also turn it into a barbecue.You just need to find a metal base for the future “lid” of any shape: round, rectangular or square. Afterwards, all that remains is to lattice it with rods, fix it with a stand at the bottom of the drum and sand down the unevenness.
"Stone Ring". For a concrete “foundation” it is necessary to calculate the required diameter, make formwork and fill everything with heat-resistant cement mortar, adding rigidity with reinforcement or stones. Afterwards we dig a hole, install the rim and fix the drum in it. In a similar way, a “border” is made from rock or brick.

The fireplace from the drum of a washing machine can also be used as a barbecue.

Well. If you plan to use the hearth outdoors, it is recommended to take care of the roof. An excellent option is to make a “well” grill. It is enough to weld two metal supports to the side walls of the drum, and attach the gable roof to them.
"Two-story" hearth. If you have a second washing drum or other metal container of similar size, it is easy to upgrade the stove with a second “floor”. You just need to weld the found reservoir to the lower cylinder. Afterwards, you can place the cauldron or saucepan directly in the top hole - a large distance to the fire will provide the ideal temperature for cooking.
Table with fireplace. An interesting solution would be to install a “fire” directly into the tabletop. The material does not matter: furniture can be made from wood, metal or concrete. The main thing is to provide a gap between the fire and the tree, and secure the drum with strong iron pipes or profiles.
Gas firebox. If desired, the hearth can be heated not with wood, but with gas.But you need to be able to connect the pipes to the drum, make connections and connect the system to the gas cylinder, not forgetting about safety precautions.

A fireplace made from a washing machine will become not only a place for cooking or heating, but also an unusual decoration for a summer cottage. Thanks to the perforations on the walls, the flame looks gorgeous in the dark, especially after decorating the homemade product with legs or a border.