Beko dishwasher breakdowns

Beko dishwasher breakdowns Serious malfunctions of Beko dishwashers are not as common as with models from other manufacturers. However, such devices still have certain weak points that owners may encounter after several years of active use. What breakdowns are most common in Beko dishwashers? When can you not do without the help of a professional, and in what cases can you cope on your own?

Water does not enter the PMM

Sometimes Beko dishwashers stop washing dishes, and the liquid intake indicator on the dashboard lights up. In such a situation, the first thing you need to do is make sure that the shut-off valve is in the open position. Then you need to check for blockages. It is also worth making sure that there is good water pressure in the main line.

Further steps to resolve the problem:

closing the valve, disconnecting the hose from the body part. If you have Aquastop, you should carefully inspect its sponge. If the swollen absorbent blocks access to the hopper, you will need to replace the element with a new one;
dismantling the mesh filter, cleaning it if there is debris.

If water is constantly being collected and drained, this indicates a breakdown of the solenoid valve or pressure switch (relay). The control module sends commands to the coils, and the membrane parts open slightly for subsequent fluid intake. If the elements are burned out, the valve will only remain in the closed or open state. To replace, you need to look into the block at the base of the inlet hose; the structure is located there.

The pressure switch controls the water level in the tank. When it breaks, the liquid will begin to overflow or not reach the desired volume. The sensor is located next to the dishwasher motor in a protective box from which the hose extends. It should also be checked for blockages that affect the accuracy of the relay readings.

The housing is leaking

The presence of a leak, in most cases, indicates wear of the drain pump gaskets. In this case, the dishwasher must be turned upside down and replaced. If a leak is detected from the door, you should press it harder and check the condition of the seal.

Important! Mechanical damage, wear of the sealing element are reasons for urgent replacement of the part; this is quite simple to do: you need to carefully remove the old rubber band and insert a new one into the grooves.

When loading dishes into the dishwasher, you need to make sure that large items do not prevent the door from closing. It is also important not to exceed the maximum number of items allowed. Otherwise, the quality of washing will be unsatisfactory. dishes for dishwasher

If the door does not close and starting fails, the problem may be more serious. It is worth inspecting the locking device, since the reason for the inoperability of the equipment may be its malfunction. If there are any breakdowns, the part will have to be replaced; it cannot be repaired.

It is also important to check the hose connections. You need to tighten them well if they are loose. If necessary, worn clamps are dismantled and new ones are installed in their place.

Waste water remains in the PMM

The source of the problem may not only be the compressor (pump). Often the reason for the lack of fluid supply is a blockage.Here is the procedure for high-quality cleansing.

open the washing chamber door;
remove the baskets from the compartment;
Unscrew the drain filter and rinse it under running water;
remove water and dirt from the mounting hole;
remove the cover by pulling it towards you;
Wear rubber gloves and collect any dirt that may block the fan impeller.

Then you should turn off the hose drain and remove debris from the cavity. Often, a blockage forms in the elbow part of the sewer system. You can call a repair specialist or do it yourself using special chemical compounds.

Beko dishwashers are not perfect, so they may experience other breakdowns. For example, such problems include failure of the heating element or control module. If such problems arise, it is better to seek help from professionals, otherwise repairing the damage yourself can only worsen the situation.