Review of dishwasher MPU 700

dishwasher MPU 700 An organization that, due to the nature of its activities, constantly deals with dirty dishes, must have a reliable dishwasher with good performance, such as the MPU 700. What is the purpose of the MPU 700 dishwasher? What are its technical characteristics, equipment, how does it work and install? We will answer all these questions in our small but informative review.

Purpose of the equipment

Everything professional and industrial dishwashers Designed for washing large quantities of dishes in catering establishments and other organizations that use reusable dishes. MPU 700 is a dome-type dishwasher, which is used for washing dishes placed in cassettes: plates, bowls, glasses, trays and cutlery.

The dimensions of objects should not be larger than 530 x 325 mm. Recommended for organizations serving no more than 50 seats (bars, restaurants, canteens, etc.). The manufacturer of the MPU 700 is the republican unitary enterprise “Grodno Trade Mechanical Engineering Plant”, which is located in Belarus in the city of Grodno.

Characteristics and equipment of the machine

The machine is capable of washing up to 720 items per hour, while a standard washing cycle takes no more than 80 seconds. Other technical characteristics of the machine are also very decent.

In one cassette you can put: 18 plates or 36 glasses or 60 cutlery or 6 trays.
The machine heats the washing solution to 40⁰C, and rinses the dishes with water heated to 85⁰WITH.
With side tables, the machine has the following dimensions: length – 1900 mm, width – 900 mm, height – 1500 mm.
The total weight of the dishwasher with all equipment is about 125 kg.
The estimated service life of the MPU 700 is 8 years.

MPU 700 The machine can be equipped in different ways, so before purchasing you need to check with the seller what will be included in the package. But usually the product comes with:

section for washing (1 piece);
table for loading cassettes (1 pc.);
table for unloading cassettes (1 pc.);
cassettes (5 pcs.);
mesh (1 pc.);
shelf (2 pcs.);
suffocating device (1 pc.);
supports (6 pcs.);
corrugated siphon (1 pc.);
movable pipe (1 pc.);
box with a tank for detergent (1 pc.);
nuts and washers (24 pcs.);
fuse link 6.3A (3 pcs.);
nozzles (4 pcs.);
membrane, ring, cuff and gasket (1 pc. each).

The fusible link, nozzles, rings, gaskets and cuff are designed for the pump, dispenser and water heater tank.

How the machine works

The passport for household appliances indicates that the machine is programmed for 3 cycles of operation: wash, pause, rinse. The wash lasts 65 seconds, the pause lasts 5 seconds, and the rinse lasts 10 seconds. The dishes are washed thanks to the pump. It takes the detergent from the tub and dispenses it into the sprinklers. And rinsing is carried out thanks to the supply of hot water, which comes from the water heater and is supplied to the sprinklers.

A pause is needed to switch the flow of detergent and hot water. The machine control system can increase the pause between washing and rinsing if the heating element does not have time to heat the water, which usually happens during intensive operation of the unit.The temperature sensor controls the heating of the supplied water and eliminates the possibility of supplying cold water for rinsing.

Thanks to the factory settings, the rinse water temperature is 85⁰C, but it can be decreased or increased by rotating the potentiometer screw. If you need to reduce the temperature, rotate the potentiometer counterclockwise, if you need to increase it, then rotate it clockwise. It's simple.

If, after adjusting the temperature, the thermal switch begins to operate, which protects the heating element from overheating, it means that the rinsing water is boiling, you need to reduce the heating temperature.

How to install

The installation of MPU 700 must be carried out by accredited specialists who have entered into an agreement with RUE Grodtorgmash. First the washing machine is unpacked. You need to check the availability of all components. We install the loading table, and then pass a flexible line through its bushing, which we connect to the sprinkler. We install the machine itself in a vertical position according to the level. The permissible difference should not be more than 2 degrees.

Next you need to assemble the loading and unloading tables and then attach them to the washing section. Using special supports, the height of the tables can be adjusted. Pay attention to the adjustment of the table tilt where the cassettes are unloaded. The water should flow into the bath. Don't forget to secure the shelves for storing cassettes. The next step is to remove the protective film from all components. Next, you should connect to the water supply, sewerage and electrical networks according to the instructions included in the MPU 700 kit.

So, the industrial dishwasher MPU 700 has a simple and reliable design and is capable of performing its function perfectly for many years.It has an affordable price and is easy to assemble and put into operation. Ideal option for small and medium-sized businesses.