How is the sink attached above the washing machine?

How to attach a sink above a washing machine By installing a washing machine under the sink, you can significantly save space and modernize your bathroom interior. There is only one “but”: attaching a sink above a washing machine is not so easy and sometimes quite risky. In order not to spoil the plumbing, machine and personal health, it is necessary to clarify in advance the reliability of such installation and remember safety precautions. Let’s take a closer look at all the nuances and pitfalls.

How is a custom sink installed?

If you purchased a compact washing machine to be built under the sink, then there will be no problems with installation. The miniature washing machine fits easily even in the sink: its height does not exceed 70 cm, which allows you to install the machine under almost any washbasin. With narrow and full-size equipment, this option is not possible, as the unit will not fit into the measured space. You will have to select special plumbing fixtures and fix them on the wall so that they do not come into contact with the ceramics. There are three reasons for this:

the fixation on the wall is reliable and allows you to raise the sink to the required height;
ceramics are heavy and should not put pressure on the washing machine;
The machine vibrates strongly when washing and spinning, so a gap of at least 1 cm is required between it and the sink (otherwise the washing machine will hit the plumbing, damaging both itself and the ceramics).

There should be a gap of at least 1 cm between the sink and the washing machine.

For built-in washing machines, special sinks are sold that provide a side drainage system, simplifying the placement of equipment. The ceramic bowl is fixed to the wall using steel brackets included in the kit.These corners can withstand a weight of more than 120 kg, so the washbasin will not collapse even if used carelessly. The installation process looks like this. sink installation diagram

We measure the required height and make markings on the surface.
We drill holes for the brackets.
We screw the corners to the wall.
Place the sink.

To make the mounting to the wall more reliable, it is important to correctly mark and align the position of the sink. Then the sink will fit perfectly and will last for many years.

Varieties of special sinks

The modern market offers consumers a wide range of sinks for integrating washing equipment. You can buy sinks of various shapes and colors, simple or decorated with special fittings - the choice depends on taste, wishes and financial capabilities. The main thing is to understand that in any case it is necessary to mount it to the wall and have a gap of 1-5 cm. Even if it seems that in the photo in the online store the bowl is lying directly on the washing machine. In fact, there is a hidden bracket that provides protection from damage and falls.

Our mini-review of the most popular models will help you choose a sink.

Santek Pilot-50. White faience sink for a washing machine, standard rectangular shape. Its width is 60.3 cm, depth is 50, and height is 17.7. There is only one hole for the mixer and it is located in the center. The drain diameter is 4.5 cm, and to avoid accidental overflow there is an additional drainage system. The main advantage of this sink is considered to be practicality: thick and high side walls prevent water from splashing. Another “plus” is availability and low price, since the cost of Santek ranges from $20-45. This is one of the cheapest options.
RAVAL BUTA (5211600).A custom sink in a modern style: the square shape of the sanitaryware is combined with a teardrop-shaped bowl. Made from white artificial marble, which gives the product a beautiful glossy sheen. It measures 60 cm in width and length, and a little more than 10 cm in depth. It weighs 25 kg, and the product has a 5-year warranty. The set includes a stone soap dish that masks the drain hole.
Andrea Onyx 600. The unusual shape of the sink, in which there is no front wall, immediately catches your eye. The non-standard design is complemented by a rectangular “thin” drain, disguised with a special lid. This model is made of cast artificial marble. The hole for the mixer is located right in the center. Dimensions: 60 by 60.
Aquaton Rhine 60. White rectangular and deep bowl, harmoniously combining style, practicality and convenience. The main advantage of this sink is its high-quality and environmentally friendly material, consisting of marble chips and polyester resins. The owner will also be pleased with the strength and resistance of the surface to chemical and mechanical damage thanks to the special polymer coating Gelcoat. The place for the mixer is allocated in the center, and the drain hole is disguised under the back wall. Aquaton costs about 10-11 thousand rubles.

The cost of special sinks for installing a washing machine varies on average from 3,000 to 38,000 rubles.

Aquaton Londri 105. An interesting option is a rectangular asymmetrical sink made of cast marble. Its “trick” is that a small bowl for washing hands is on the right, and the rest of the product is flat and is used as a tabletop. This allows you to build under it not only a washing machine, but also a cabinet for small items.All this adds functionality and practicality to the washbasin, and also helps the machine and plumbing fit more harmoniously into the bathroom interior. The average service life of Laundry is 10 years, with a warranty of five. Price – about 8-10 thousand rubles.
FLORENTINA Victoria 600. It is a modern version of the classic rectangular washbasin with a round basin. It features a laconic design and low cost. It is made of artificial stone and has standard dimensions: height 20 cm, width and depth - 60 cm. The hole for the tap is located in the center, and additional drainage is also provided to protect against overfilling. The product weighs 12 kg, and the kit includes a siphon.
Water Lily Long. Another countertop sink with a non-standard shape. The bowl itself with the drain is on the right, and the rest of the space is used for storing shampoos and bath accessories. The sink is made of earthenware, so it dazzles with whiteness and glossy shine. Supplied with a hole for the overflow, as well as a siphon and a towel holder. Dimensions – 80x50 cm, price – from 14 thousand rubles.

A washing machine built under the sink is convenient, aesthetically pleasing and practical. The main thing is to choose the right plumbing fixtures and securely fix them on the wall.