What bearings are on the Hotpoint-Ariston washing machine?
It is better to find out which bearings are on the Hotpoint-Ariston washing machine before starting the repair. This will make it possible to buy components in advance and not be interrupted during work. Ring sizes depend on the model. Let's figure out which spare parts are suitable for different Ariston washing machines.
Selecting bearings correctly
If you carefully approach the issue of selecting components, it will be difficult to make a mistake. Each model Hotpoint–Ariston match certain bearings and oil seal. They differ in the diameter of the internal and external holes, and in thickness. Therefore, look at the name of your “home assistant” and its serial number in the instructions or on the nameplate.
Many Ariston washing machines are equipped with bearings 203 and 204. In most cases, such rings correspond to an oil seal 25x47/64x7/10. These are the models:
Ariston LB 446 ST IT;
Ariston LB 446 ST COP IT;
Ariston LB 476 ST FR;
Ariston AV 522 X IT;
Ariston AV 532 T IT;
Ariston AV 632 TX IT;
Ariston AI 637 T IT;
Ariston AI 648 TX IT;
Ariston AV 521 X IT;
Ariston AV 520 X IT;
Ariston AV 531 TX IT;
Ariston AV 530 TX IT;
Ariston AI 631 TX IT;
Ariston AI 630 TX IT;
Ariston AV 637 T IT;
Ariston AV 637 TX IT;
Ariston AV 63 TX IT;
Ariston AI 649 TX IT;
Ariston LB 618 XT CL;
Ariston WM 4 DE NEU;
Ariston WM 413 DE;
Ariston AI 533 BS FR;
Ariston AI 533 FR;
Ariston AI 638 T FR;
Ariston AV 528 FR;
Ariston AV 537 FR;
Ariston AV 537 TXA.
On some Ariston models with bearings 203-204 there is an oil seal 25x47/64x7/10.5. These are washing machines:
Ariston AD 8 EU;
Ariston AD 1000;
Ariston AL 109 X EU;
Ariston ALD 80 EX;
ARISTON AVD109ex;
Ariston AVD 109;
Ariston AVL 100 R;
Ariston Margarita 2000 AB 88 X EU;
AB 426 TX EX;
AB 422 TE;
AB 426 TX;
AB 635 TXE;
AB 646 TX, etc.
The next group of machines with bearings 204-205 and sealing rubber 35x52/65x7/10. These are the models:
Ariston AB 846 CTX;
Ariston AD 10 EU;
Ariston AI 858 CTX/1 E;
Ariston AL 858 CTX/1;
Ariston AL 946 CTX;
AL 1056 CT XR;
AB 1056 TX EX;
AML 129 EU.
Some washing machines with bearings 204-205 are equipped with a 30x52/65x7/10 oil seal. These are the models:
Ariston AVL 129 R;
Ariston AVSD 107 EX;
Ariston AVSL 109;
Ariston AVSD 127 EX;
Ariston AVSF 109 EU;
Ariston AVSL 80 R.
There are machines equipped with one mono-bearing BA2B 30x60x37. These are the models:
Ariston ALS 109 X EU, oil seal 35x52/65x7/10;
Ariston AL 1456 TX R, seal 35x47x8;
Ariston AL/ALS 88 XEU, gasket 35x52/65x7/10;
Ariston ALS 948 TX, elastic band 35×52/65×7/10;
Ariston ALS 109 XEU, seal 35x52/65x7/10;
Ariston ALS 129 X, oil seal 35x52/65x7/10;
Ariston AVSL 80 R, gasket 35×52/65×10/12;
Ariston Margarita 2000 ALS 88 X EUS, elastic band 35x52/65x7/10.
There are also rare configurations of Hotpoint-Ariston models. These washing machines should be separated into a separate group:
Ariston 100 R and Ariston AL 1256 CTX with bearings 205-206, equipped with an oil seal 35x62/75x7/10;
Ariston AQSF 05 with rings 204-205 and seal 30x52x8.5/10.5;
Ariston AB95EU and Ariston AL 109, equipped with bearings 203-204 and spacer 25x47x10;
Ariston ALS 1048 CTX with rings 204-205 and oil seal 35x63.3x9/12.5;
Ariston ARSL 109, equipped with bearings 202-203 and elastic band 22x40x10;
Ariston AS 1047 CTX/B with rings 204-205 and oil seal 30x53.5x10/14;
Ariston AVL 62 EX and Ariston AVL 100, equipped with bearings 203-204 and seal 25x47x7;
Ariston Aqualtis AQSD 129 EU AQ2005TRF with rings 204-205 and oil seal 30x52x10;
Hotpoint-Ariston AQ7D 29 with bearings 206-207 and elastic band 40.2x72x10x12.
For some Hotpoint-Ariston models, if the bearing assembly breaks down, you will have to change the tank assembly, these are the AQSL 85 CSI, AVL 80 CIS, AVL 100 CSI, AVF 109 EU, AQSF 129 CSI machines.
If you are afraid to buy bearings in advance, then you can go another way. Disassemble the washing machine and remove the rings. Show the salesperson in the store the old spare parts - he will measure the diameter, thickness and select similar parts.
At the same time, the manager will help with the selection of a suitable oil seal. It is also necessary to buy a special grease for SMA bearings - it will need to treat the rings, shaft and rubber seal. It is better to purchase original spare parts for Hotpoint-Ariston washing machines, rather than cheap analogues.
Why are there bearings in the washing machine?
An automatic washing machine with broken bearings will not be able to function normally. The bearing assembly “connects” the drum and the pulley - this allows the electric motor to spin the container to the required speed. Damaged rings cannot ensure normal operation of the mechanism.
Various signs indicate bearing failure:
strong noise, grinding and knocking during operation of the machine;
increased vibration of the SMA body;
drum play;
damage to the inner edge of the hatch cuff (an imbalance occurs, the laundry rubs against the elastic, deforming the seal);
There are rusty stains on the back wall of the tank.
For most Ariston models, the bearings are located in a cross, which is attached to the drum. The knot has two rings - inner and outer. The first is more powerful due to its larger diameter and increased thickness.The second one is located at the end of the shaft and performs an additional function, so it is smaller.
Some Hotpoint-Ariston washing machines have a mono-bearing. Such an element has two rows of balls at once, which eliminates the need for a second ring. There are few models with one double-row bearing, but they exist, and this must be taken into account.
The seal is very important
The oil seal must be replaced along with the rings. The rubber seal protects the bearings, preventing their premature wear. The gasket prevents water from getting inside the assembly. The dimensions of this part will also vary depending on the model of the washing machine.
When replacing SMA drum bearings, be sure to buy and install a new oil seal.
In the production of automatic machines today, three types of oil seals are used:
single-edged - they only prevent water from entering the assembly;
single-edged, complemented by anther. Here there is additional protection against debris and dirt getting into the unit;
V-RING are seals with a V-shaped profile. Such seals are installed only on vertical-loading machines. Due to their non-standard shape, they provide complete protection from water, dust and debris.
All modern sealing gaskets are complemented by a metal grill. When installing, it is important not to damage this reinforcing base. The original shape of the oil seal must be maintained.
The oil seal is placed on top of the bearing, in a specially allocated seat for it. The gasket seals the hole, preventing dust and moisture from getting inside the assembly. It is better to purchase original rubber bands, and not analogues from the Middle Kingdom. In this case, it is not advisable to save on components.
It is better to find out which bearings are on the Hotpoint-Ariston washing machine before starting the repair. This will make it possible to buy components in advance and not be interrupted during work. Ring sizes depend on the model. Let's figure out which spare parts are suitable for different Ariston washing machines.
Add a comment