Which anti-vibration stands to choose for washing machines?

Which anti-vibration stands to choose for washing machines Although some say that if the washing machine is installed correctly, there is no need for anti-vibration stands, this principle does not always work. Sometimes, even if the washing machine was installed strictly according to the instructions, and everything was done correctly, it still makes a lot of noise during operation and jumps from side to side. Then special rubber gaskets are used. But how to choose the right anti-vibration stands?

Why does the machine “jump”?

So, before you go to the spare parts store for the SM, you need to make sure once again that the installation was carried out according to all the rules. To check this, disconnect the washing machine from all communications and try to swing it by hand. If the unit immediately “started”, it means that the floor underneath is uneven, or the legs of the unit themselves do not touch the surface evenly.

If the problem is the legs, then you can twist the nuts in different directions so that the legs are located at the same level. If the unevenness of the floor is to blame, then there are two options: either level it, or buy a very solid stand specifically for the washing machine. Especially periodically it is necessary to level wooden floors, which tend to sag. Other reasons why the SM may be noisy and actively move during operation. find all the bolts

The shipping bolts have not been removed. They hold the internal elements of the SM during transport and must be removed immediately.
The shock absorber or both have failed. If a part is faulty, it no longer performs its functions, hence the strong vibrations.
Bearing wear. With this kind of problem, vibration is not the worst thing.During operation, the washing machine makes an uncharacteristic grinding noise and a deafening hum.
Finally, you might just have a narrow model. Due to their compact dimensions, such washing machines are less stable.

Attention! The use of stands makes sense only in the last of the cases presented. In the rest, the problem will have to be solved through a full repair.

Types of vibration dampers

You can start choosing stands for the legs of the washing machine. They differ from each other only in color, shape and material from which they are made. As a rule, footrests are black or white, round, square or polygonal in shape, but with the material everything is a little more complicated.

Linings can be made of rubber or polyurethane. They are quite durable and last a long time. The diameter does not exceed 5 centimeters. The surface of such pads is very textured so that the legs rest on it steadily. The lower part is equipped with stiffening ribs, allowing vibrations to be contained even better. rubber stands

Silicone coasters are practically no different in quality from rubber ones. They are softer and more transparent, and cost more. But according to reviews, both perform their functions properly and for quite a long time. They even make anti-vibration pads from silicone that fit on the SM legs.

An alternative could be a shock-absorbing mat. It is placed directly under the unit, and the legs are inserted into special recesses in the corners. It is easier to choose a rug than legs, but it is not so cheap due to its size.

Features of choice

Among the arguments for stands, most users highlight the fact that the washing machine not only makes less noise and does not cause inconvenience, but also moves less during the spin cycle, which ensures the safety of the floor covering. Due to the constant movement of the legs, it gets scratched, the floor itself sags, and dents appear on the linoleum. This won't happen with footrests.

Among the serious shortcomings, the population notes only the high cost of the stands, which is allegedly unjustified.

Particularly popular are linings from Topperr, Helfer and Aliza. Topperr is made from polymer materials, they cost about $4 on the Internet, the advantage is their universal shape. Helfer is cheaper, as it is available only in a square shape, made of polyvinyl chloride, the cost on the Internet is around $3. Aliz coasters can generally be found for $2 for a set of 4 pieces.