Instructions for the Bosch Maxx 6 washing machine

instructions for Bosch Maxx 6 If you need information on how to start a Bosch Maxx 6 washing machine or how to connect it correctly, then you are on the right track. Here is the instruction manual. Today, electronic versions of manuals are becoming increasingly popular and this is understandable. Let's put everything in order.

Safety instructions

When installing and operating the washing machine, follow all specified requirements in the instructions. A number of dangerous situations may arise in front of you:

Electric shock hazard. That is why remove the power plug from the machine only by the body, do not pull the cord. Do not touch the fork and machine body with wet hands while operating.
Risk of injury. The glass of the door heats up at high water temperatures, do not touch it during the program. Be careful when pulling out the cuvette. Injury can occur when moving the washing machine; it is heavy, so move it together.
Danger of poisoning. Store detergents used in the machine out of the reach of children.
Choking hazard. Do not give packaging materials to children: boxes, film.
Explosion hazard. You cannot wash items soaked in solvents, gasoline, or diesel fuel; they can cause an explosion when washed, so it is better to wash them by hand first.

Wash

We will present the process of starting the wash in the form of the following algorithm:

Open the water tap to which the machine is connected.
Connect to the network.
Sort the laundry and load it into the drum.

Important! To prevent the drum from becoming unbalanced, load small and large items at the same time and keep in mind the maximum load.

Place the powder in the main compartment of the cuvette, that is, in the compartment on the left. If pre-washing, add powder into the compartment on the right. Fill the center compartment with conditioner to the line. Be sure to dilute thick gels with water so that the hole does not become clogged, or pour them into a dispenser container that is placed in the drum with laundry.
Turn the selection selector to the desired program, note that the knob turns in any direction.
Press the additional function button, if necessary. Please note that the buttons are sensitive; just touch them lightly.
Wait until the wash is finished and unload the laundry.
Turn off the washing machine.
Turn off the tap water.

If the wrong program is accidentally selected, then to change you need to select another program and press the Start button.

Individual settings

The Bosch Maxx 6 washing machine may have different functions depending on the model, but in general they differ slightly and are configured in the same way. These functions include:

delayed start;
spin speed, which is adjusted not only before starting the program, but also during the program;
spots – extended duration program;
pre-wash with water heating up to 30 degrees;
easy ironing;
adding water, which means an additional rinse.

In washing machines of this series, the child lock of the control panel is carried out by holding the Start button for 5 seconds and will remain in effect until this lock is turned off. Disabling can also be done by holding this button. This washing machine allows you to adjust the volume of the signals, for this you need:

Set the programmer to the 12 o'clock position (off).
Turn the programmer 1 notch clockwise.
Press the spin setting button and hold.
Turn the programmer another 1 notch clockwise.

Bosch Maxx6 volume setting

Important information

Treat your washing machine and things with care, before washing:

check all pockets;
fasten the zippers;
remove rings and hooks from curtains;
Wash underwear and small items in a special bag.

Before the first wash, the manufacturer recommends running the machine idle, that is, without laundry. To do this, pour a liter of water into the main compartment of the detergent dispenser and add a dose of powder. Select a mode with heating up to 60 degrees, without spinning.

It is not recommended to bleach laundry in a washing machine, or to bleach clothes frequently. dyeing clothes using special means, as they affect the internal parts of the machine.

Maintenance and care

Bosch Maxx 6 Maintenance of the machine involves cleaning the drain pump, drain hose and metal mesh on the inlet valve. When cleaning the pump, it must be removed after turning off the machine. Unscrew the pump gradually, releasing and collecting waste water in a low container. After removing the filter, rinse and clean it. To clean the drain hose, disconnect it from the siphon by releasing the clamp. To remove the inlet valve mesh, unscrew the inlet hose and use pliers to carefully pull the mesh towards you, rinse it and return it to its place.

When caring for your washing machine, do not forget to regularly wipe its body from dust and drops, using only soft napkins or rags. Do not wash the washing machine under running water, only with a slightly damp sponge. Do not use solvents or cleaning agents.

It is very important to wash the powder dispenser; it can be pulled out if you press the middle of the middle compartment and pull it towards you.After rinsing the cuvette, wipe it and dry it. And in general, make it a rule that after each wash, wipe the drum, cuff and cuvette with a dry cloth, this way you will protect the machine from mold and odor.

The scale formed in the machine is removed with special means when starting the wash without laundry.

We'll stop there. If you are interested in knowing what to do in the event of a malfunction or some kind of breakdown, then the complete technical manual provides detailed information on this topic. Download the instructions and read.