Instructions for washing machine Indesit IWUB 4085

Indesit IWUB 4085 manual The instructions for the Indesit IWUB 4085 washing machine contain a fairly large amount of information, including information that is not needed by many users. The abundance of information makes it difficult to perceive, and some users simply cannot identify the main thing from the information provided by the manufacturer of this washing machine. We present to your attention a shortened version of the instructions for the Indesit IWUB 4085 machine; we hope this publication will be useful.

We find a place, install and connect

Determine in advance where your Indesit IWUB 4085 washing machine will be placed. Make sure that there is enough space to place it and that there is a gap between the body and surrounding objects of at least one centimeter. Take careful measurements of the machine body while still in the store, especially if you intend to build the washing machine into furniture.

Also provide access to communications in advance: water supply, sewerage, electrical outlet. And it would be a good idea to think through the connection diagram to these communications in advance. If this is all right, take a number of preliminary steps:

carefully remove the packaging;
carefully inspect the washing machine, there may be scratches or other signs of damage on the body, if so, inform the seller;
Next, you need to unscrew the shipping screws and remove the rubber plugs;
using plugs we plug the holes from the transportation bolts;
save the packaging and other unused parts, all this may come in handy.

Be careful! The washing machine is very heavy, do not move it alone.

Using the help of loaders, we place the Indesit IWUB 4085 washing machine in place and begin to connect it. First, we connect the drain hose to the siphon, directly into the sewer pipe outlet, or simply throw its end into the sink. It’s easier and more beautiful to connect the hose to the siphon, since it can be placed under the sink siphon for washing machine, a matter of five minutes, while the removal of the sewer pipe still needs to be done.

inlet hose connection The inlet hose must first be connected to the tee tap, and then the tap must be connected directly to the water pipe. This is done so that you can shut off the water supply to the machine without shutting off the water in the entire house. We tighten the hose carefully, but do not overtighten. Don't forget to insert rubber bands and seal the joints. Threaded hole diameter is ¾ inch.

Now a few words about the socket for the washing machine. The Indesit IWUB 4085 “home assistant” must have its own separate socket, designed for the load that the device will provide. No adapters or extensions. The socket housing must be moisture resistant. Additionally, the outlet must be protected with a difavtomat for safety.

How to use the powder tray

Very often, the quality of washing depends on how effectively the detergents work, because the programs and functions of a modern washing machine can only provide half the success. Before you start washing, understand how to use the powder tray. The powder cuvette of the Indesit IWUB 4085 washing machine consists of three static compartments and one installed. In the picture below, you can see the powder receiver, which is exactly what is installed on this model.

powder receiver Indesit IWUB 4085

The compartment under number 1 is intended for pre-washing and there is no need to pour powder there under normal conditions.
Compartment No. 2 is the most popular, since powder should be poured into it under normal washing conditions. If you look closely, you will see that this compartment is larger than the others and is located in the very middle, crowding out the other compartments. You can pour washing gels into this compartment, but only when there are 1-2 minutes left before the machine starts, otherwise the gel will flow down.
The compartment numbered 3 is needed in order to pour rinse aid into it; it is strictly forbidden to pour powder there.
The fourth compartment is removable. They place it only when necessary, when you need to start the bleaching mode, so you need to pour bleach into it.

Attention! Pour Indesit IWUB 4085 into the tray of the washing machine; only machine washable powder can be used. Hand washing powder causes increased foaming, which can damage your home assistant's electronics.

Starting the first and subsequent washes

A brand new washing machine is not at all clean inside. Dust, machine oil residues can accumulate inside the pipes, and sometimes even mold grows there. Therefore, you need to start a new machine for the first time without laundry and wash it at the highest temperature. You can also add a special cleaner for cleaning the insides of the washing machine - it won’t hurt. It's done like this.

washing machine Indesit iwud 4085

We turn on the washing machine from a special button on the control panel.
Turn the program selection knob to the “clap” position.
Set the washing temperature to 90 degrees.
Open the tray and pour in a product to clean the inside of the machine.
Close the tray and hatch.
We press the “start” button and wait for the end of the program.

The main wash is carried out in the same way.True, at first, difficulties may arise with choosing programs and additional functions. Good tips are symbols on the Indesit washing machine, or rather on its control panel. To understand the decoding of this or that designation, read the article posted on our website.

Taking care of the “home helper”

Daily care of the Indesit IWUB 4085 washing machine is not difficult. It will not take much time and effort. First of all, you need to use a pre-soaped cloth to go through the rubber bands, the inner surface of the drum, the tray, the front panel, the lid and the side walls. Then wipe all the elements again with a damp cloth. There is no need to use any special liquid cleaning compounds, much less abrasive cleaning agents.

After washing, you need to leave the hatch slightly open so that the inside of the machine is ventilated, the same should be done with the powder receptacle. Often the powder receptacle becomes clogged with powder residues, so special attention must be paid to cleaning it.

To remove the powder receptacle, press down on the tab located in the conditioner compartment and at the same time pull the tray towards you.

The dust filter also needs to be cleaned occasionally. You will find it under the front narrow panel, which is located at the bottom of the washing machine body. The filter is simply unscrewed, and the insides are washed and cleaned with a rag and soapy water. Among other things, check the inlet hose at least occasionally. If the slightest sign of damage is detected, it must be replaced.

So, here is the entire text of the adapted instructions. As promised, we have provided only basic information. If it is not enough for you, read the full version of the instructions for the Indesit IWUB 4085 washing machine, which is posted below. Good luck!