Where are the shipping bolts on the Candy washing machine?
Most users believe that after purchasing a Candy washing machine they have only one task - installing it and connecting it to all communications. However, this is not quite true. In fact, the transport bolts that will need to be removed play an equally important role. But not everyone knows what they are and where to look for them. Let's look at these issues.
Let's start looking for these fasteners
The Candy washing machine has shipping bolts in the same place as all other washing machines. Finding them is easy. You just need to pay attention to what type of loading your machine has.
with front loading type, the bolts are located near the back cover;
for vertical loading - near the top panel, or near the same back cover.
If you are not sure of your actions, it is better to refer to the instructions!
As a rule, it contains not only information about where the mentioned bolts can be found, but also provides a guide on how to remove them. If the leadership is not nearby, do not despair. You should be able to find the shipping bolts yourself.
You just need to carefully examine the back panel of the washing machine, because often the bolts are attached precisely along the edges of the back wall. Moreover, all front-loading washing machines have the same position of these fasteners, so if you have already removed them before, repeating the procedure will be very easy.
Purpose of the screws
Transporting a Candy washing machine, unlike other household appliances, is much more difficult. If for consumer electronics a regular box with protective paper and softening materials is sufficient, then with washing machines the situation is different. Its structure does not allow for improper handling, because the drum and tank are constantly in a suspended position and are only slightly secured to other elements. When washing, this arrangement eliminates vibrations, but during transportation it makes the machine extremely vulnerable.
When the “home assistant” is driven over potholes, any stone or bump can provoke a strong jump, which will have a bad effect on the unit, because the drum will hit the body, thereby damaging itself and other internals. This is where shipping bolts come to the rescue. They allow the drum to remain stationary, and this, in turn, negates the likelihood of damage when the Candy washing machine is transported.
The bolts are standard in design. Their shape is represented by a long screw with a spiral rod, and at the end there is a polymer sleeve, which is separated from the metal rod by a rubber layer. This washing machine has only 4 bolts.
What happens if you leave the bolts on?
Washing machine manufacturers strongly recommend removing bolts before washing. After all, when starting, the engine increases speed and tries to spin the drum. But if the tank continues to be fixed in a stationary state, such impact can cause damage. And not only the tank, but also the shock-absorbing system, shaft and other elements that will be dangerously close to the drum.Prolonged operation of the machine in this condition will cause significant harm.
Due to the fact that washing machines are becoming more and more popular, there is a growing belief among the population that everyone knows how to use them correctly. For the same reason, people often neglect the instructions and don’t even realize the importance of removing the shipping bolts, so they often start washing with them. In this situation, the washer will let you know about the problem as follows:
a high level of vibration will occur;
the machine will begin to make sharp jumps, which will be stronger than when spinning at high speeds;
strange, uncharacteristic sounds will appear.
If it turns out that the machine is working, but you remembered the bolts, immediately press the “Stop” button and unplug the power cord. After these manipulations, it would be a good idea to invite a specialist to assess the extent of the damage. It is extremely important to note that bolts that have not been removed are not covered by warranty, which means that in case of serious damage, repairs will have to be done at your own expense.
However, you may be lucky and get away with a slight fright. However, if the machine has been used for a long time, you will have to prepare for the same lengthy repair or even to dispose of the device. That is why it is extremely important to get rid of the transport bolts at the very beginning and only then start the Candy washing machine.
Most users believe that after purchasing a Candy washing machine they have only one task - installing it and connecting it to all communications. However, this is not quite true. In fact, the transport bolts that will need to be removed play an equally important role. But not everyone knows what they are and where to look for them. Let's look at these issues.
Add a comment