Location of the heating element in the LG washing machine
One of the most important parts in a washing machine is the heater. Knowing where the heating element is located, what it looks like and how it is obtained, you can regularly “check” the element, monitor its condition and replace it if it malfunctions. We suggest you understand all the nuances using the example of LG machines.
Let's get to the details
Unlike some third-party washing brands, the location of the heating element in the LG machine is very convenient for the repairman - the desired spiral is located at the back. There is no need to disassemble half the body, as in automatic machines Samsung, just remove the back wall and take a closer look. But there is no need to rush, since you cannot do without preparation for the process.
When disassembling the washing machine, you must follow safety precautions.
First of all, disconnect the machine from the electricity. For safety reasons, it is recommended to repeatedly check that the housing is de-energized, otherwise repairs cannot be started. The second step is to turn off the water, disconnect the inlet and drain hoses, and secure all the wires and tubes in the provided grooves on the body - so that long elements do not interfere with the dismantling of the heating element.
The next step will be to ensure free access to the machine. We move the free-standing machine away from the wall, and move the built-in models to the center of the room. Do not forget that the unit is heavy, and it is better to enlist the support of a couple of extra hands.
The preparation ends by spreading out old rags and removing the back panel. That's all. True, not everyone can immediately spot the heating element among the spare parts of an LG washing machine - the part is “hidden” in the depths of the case. Further instructions will help with the search.
What does this element look like?
The mistake of novice craftsmen is that they start looking for the zigzag tube of the heating element seen in advertising banners. The heating element actually looks like this, but it is impossible to find it using this description. The fact is that the spiral is hidden deep under the tank and hidden from prying eyes.
The LG washing machine is no exception. By removing the back panel and paying attention to the lower part of the rear wall of the tank, you can only see the outer contacts of the heating element. The temperature sensor contacts are also located here. Another feature of the heating element is the connected wiring, so it is difficult to confuse the element with other parts of the unit.
It is recommended to take a photograph of the heating element to record the location of the wires and avoid errors when reconnecting.
But finding a heating element is half the battle. It is equally important to correctly remove the element so as not to damage its contacts, housing and seat. In short, the sequence of actions is as follows:
we release the wiring, not forgetting about the markings;
loosen the central nut;
We take the part by the body and begin to gently swing it, removing it from the fasteners;
slowly take out the heating element, trying not to touch the contacts.
You must be extremely careful when handling the heating element. As a rule, the contacts and surface are very vulnerable to mechanical damage, and a new part is not cheap. Do not forget about preparation for subsequent installation and thoroughly clean the seat from scale and dirt. If everything is done correctly, then after replacement the heating element will serve for a long time and properly.
One of the most important parts in a washing machine is the heater. Knowing where the heating element is located, what it looks like and how it is obtained, you can regularly “check” the element, monitor its condition and replace it if it malfunctions. We suggest you understand all the nuances using the example of LG machines.
Add a comment