Error F06 on an Indesit washing machine

All modern Indesit washing machines are equipped with a self-diagnosis system for faults. Thanks to this addition, the machine detects any problem and quickly reports it to the user. Machines with a display display an error code on the display. If the SMA does not have a screen, it will indicate a breakdown by flashing indicators. Let's figure out how to recognize error F06 on an Indesit washing machine and what malfunction it indicates.

Code identification

Is it possible to deal with the problem with your own hands and return the washing machine to working capacity? To solve the problem, you need to figure out what this error means. Code F06 indicates a problem in the control of the washing machine, as a result of which the machine does not respond to user commands or does not start washing. That is, the washing machine simply does not respond to button presses and does not start the selected mode.

The Indesit machine, which does not have a display, displays an error by flashing the lights. The “Extra Rinse” and “Soak” indicators are lit. The “Quick Wash” and “Super Wash” lamps are allowed to glow. The “Ironing” and “Dirty Laundry” indicators may be on. Also, an attentive user may notice the blinking of the “Lock” LED.

What to do when faced with such a problem? How can I return my Indesit machine to working order? Whether it is possible to cope with the breakdown yourself, or whether you will have to call a specialist, we will analyze further.

Refuses to turn on

How to correct the situation if the user’s attempts to turn on the automatic washing machine remain unsuccessful? What if the washing machine refuses to start?

First of all, you should check whether there is electricity in the apartment; perhaps the power in the house is turned off. See if the plugs are knocked out. You can also check the serviceability of the outlet itself and the power cord with a multimeter. If defects are noticeable upon visual inspection of the power cord, the cord must be replaced.

If the washing machine is connected to the network through an extension cord, it is worth inspecting it for damage. Next, you should check the serviceability of the buttons themselves on the control panel. If everything above is in order, you will have to inspect the main control module of the washing machine. If defects or broken connections are clearly visible on the board, you need to invite a professional.

It will not be possible to repair the “brain” of the washing machine without certain knowledge and experience; you can only ruin the part, and this will lead to higher repair costs.

The technician will diagnose the control module, replace the triac if necessary, solder the tracks, etc. elements of the control module have failed

Lights flash randomly

In some cases, a simple reboot of the equipment helps to eliminate the F06 error. Unplug the washing machine for about 20 minutes. If this manipulation does not help, and the washing machine gives an error again, it is better to check the wiring. In certain Indesit models, the wires pass in close proximity to the internal parts of the machine. Such close proximity leads to their damage. You can check the wiring with a tester, and if it is damaged, replace it yourself.

It makes sense to check the capacitors on the control board of the washing machine. Sometimes, this behavior of the “home assistant” is caused by burnt-out capacitors, namely 10v680uf, 10v1000uf, 10v470uf. Diagnostics of elements and their replacement will help eliminate the problem.

Can't start washing

It happens that error code F06 appears after the wash has started. What to do in this case? First, you should check whether the drum door is closed tightly. If the hatch is not completely closed, the protective system will not allow water to enter the drum, but will pause the wash, displaying an error F06. It may be necessary to replace the UBL to fix the problem. UBL replacement required

Diagnosis and replacement of the locking device is quite simple:

de-energize the SMA;
Unclench and remove the metal clamp securing the hatch cuff;
insert the rubber seal into the drum;
unscrew a couple of bolts holding the UBL;
put your hand into the hatch behind the body and remove the lock;
disconnect the UBL supply wiring;

Before disconnecting the contacts, take a photo of the wiring diagram!

Check the device's serviceability with a multimeter.

The tester switches to resistance measurement mode. The probes of the device are applied to the neutral contact and phase. If a three-digit number is displayed on the multimeter screen, it means the lock is intact. Afterwards, the probes are applied to the neutral and common contact. If the device shows one or zero, everything is in order. A faulty UBL must be replaced; repairing the lock is impossible.

Probably, code F06 appears because the machine cannot draw water, and there is simply nothing to wash with. Then make sure that your water is not turned off or the shut-off valve is not closed. In most cases, you can fix the error yourself if you pay close attention to the “symptoms” of the breakdown.