What is auto parking in a washing machine?

What is auto parking in a washing machine Top-loading washing machines are not as widespread as front-loading ones, but there is still a demand for them, mainly due to the compact size of the equipment. When using a “vertical”, you may encounter a number of problems, for example, scrolling of the drum when the doors are open. This drawback is eliminated by activating the auto-parking function in the washing machine. We’ll tell you why this option is provided and how it makes life easier for the housewife.

Why do you need washing machine parking?

The design of most vertical washing machines is similar - under the top cover of the body there are additional doors that provide access to the drum. A latch is provided to secure the metal doors. On inexpensive models, the fasteners cannot properly hold the flaps when braking or, conversely, accelerating the drum.

Therefore, it may happen that the doors open on their own during the washing process, when the hole is located not at the top, but at the bottom of the machine. This situation will add more trouble to the owner, because turning the drum with the doors open and not damaging the tank is quite problematic. Automatic parking will help lock the internal container in the correct position, making it easier to repair the equipment. This will make it much easier for the user to repair a broken mechanism.

Automatic parking in the washing machine ensures that the drum hole is aligned with the body hatch.

This option will be useful not only if the “vertical” breaks down. Parking the drum in the washing machine will also provide the owner with safe access to clean laundry. By activating the function, you don’t have to worry about the container scrolling down, pinching your finger.The drum hatch will lock firmly into place.

A significant disadvantage of the “vertical”

If you have a choice between a vertical and a front-facing machine, you should think carefully. In fact, “verticals” have one significant drawback, which equipment sellers do not warn about. The top cover of the vast majority of models is not covered with a protective layer, so after several years of use it begins to rust. Automatic parking makes it easier to remove laundry

To prevent corrosion, the cover must be carefully maintained. Be sure to not only wipe the entire surface and rubber seals dry, but also use cotton swabs to remove droplets of water remaining in the area where the door is attached.

Painstaking, proper care will delay the appearance of rust, but it will not be possible to avoid the destruction of the lid. It’s just that corrosion will begin not in 2-3 years, but in 4-5 years. Many owners of vertical systems are interested in how to fix the problem.

If the top cover of the case is so rusty that it becomes scary to use the washing machine, there are two options:

purchase a new door and install it in place of the damaged one. The cost of a spare element is different for each model; it is quite possible to purchase a cover in the range of 2-4 thousand;
remove the door, scrape off the peeling paint, go over the rust with sandpaper, and prime the damaged areas. Then the panel needs to be painted and installed in place.

In any case, after a couple of years the lid will rust again. This problem is more typical for cheap models, the top panel of which is made of low-quality iron, which is highly susceptible to corrosion. Therefore, when buying a vertical machine, it is better to give preference to machines from reliable brands.